Iwata Custom Micron CM-C Plus Gravity Feed Dual Action Airbrush ICM4502 CM-CP2
Find parts for iwata Custom Micron CM-CP2 in our Ultimate Iwata Airbrush Guide & Part Finder
Spraygunner extends a complimentary initial servicing offer to customers who have purchased Custom Micron series airbrushes from our establishment.
Please be advised of the following terms and conditions:
- Complimentary First Service: Spraygunner provides a one-time, no-cost servicing of Custom Micron series airbrushes for customers who have made their purchase at our store.
- Customer Shipping Responsibility: It is the customer's responsibility to bear the shipping expenses for sending their airbrushes to our service center.
- Replacement Parts Responsibility: Customers may incur charges for any necessary replacement parts during servicing, except for warranty cases.
- Professional Cleaning and Diagnostic Services: Spraygunner offers professional cleaning and diagnostic services at no additional cost.
The Iwata Custom Micron CM-C Plus ICM-4502 Gravity Feed Dual Action Airbrush is the ultimate choice for experienced airbrush users who demand absolute precision and extreme detail spraying. The Custom Micron series is renowned for its superior atomization and unmatched performance standards. With a 0.24 oz / 7 ml fluid cup and a micro air control (MAC) valve, this airbrush allows for incremental control of airflow, enabling an ultra fine to medium spray.
The ergonomic main lever and preset handle provide maximum comfort and control, reducing finger fatigue and increasing overall efficiency. The spring-steel needle is highly durable and resistant to breakage, making it a reliable tool for long-term use. Additionally, the needle packings are solvent resistant, ensuring longevity and preventing any damage caused by chemicals.
The Iwata Custom Micron CM-CP2 Plus also features the Crown Cap Dock, a convenient storage solution for the Crown Cap when it is not in use. The airbrush is accompanied by essential accessories, including Iwata Lube for lubricating the Head Needle and Main Lever mechanism, an Iwata Pistol-Grip Filter to collect and evacuate moisture build-up, and an Iwata Nozzle Spanner for easy removal of the Head Nozzle.
For added convenience and protection, the airbrush comes with a durable aluminum storage case. The Iwata Custom Micron CM-C Plus Airbrush is manufactured to the highest standards in Japan, guaranteeing exceptional quality and reliability.
With its exceptional precision, durability, and user-friendly features, the Iwata Custom Micron CM-C Plus Gravity Feed Dual Action Airbrush is a must-have tool for artists, illustrators, and hobbyists who require the utmost control and precision in their work. Elevate your airbrushing experience to new heights with the unmatched performance of the Iwata Custom Micron series.
Specifications of CM-CP2:
Absolute Precision Series Custom Micron ICM4502 CM-CP2
Spray Scale: Extreme Detail to Medium
Optimal Working Pressure: 12 - 15 psi (0.08 - 0.10 Mpa)
Head System: C2 - Needle, Nozzle, Nozzle Cap
Nozzle Type: Screw-On
Feed Style: Gravity
Paint Capacity: 0.24 oz (7 ml)
Action Dual Handle Type Single Cut, Pre-Set with Crown Cap Dock
Net Weight: (lbs) 1.93
Net Weight: (kg) 0.88
Assembled Dimensions (in): 1.10 x 6.10 x 3.07
Assembled Dimensions (mm): 28 x 155 x 78
Made in Japan
Iwata Airbrush Limited Manufacturer Warranty
Iwata offers a five-year limited manufacturer warranty on Iwata airbrushes. This warranty is valid for the original purchaser from the date of purchase when bought from an authorized Iwata seller (SprayGunner). The warranty covers defects in materials and workmanship, and Anest Iwata-Medea, Inc. will repair or replace the unit, or provide replacement parts, upon a valid claim which must include proof of purchase.
Owner Responsibilities:
- Follow the written instructions provided with the airbrush for proper operation and maintenance.
- Retain the bill of sale, payment record, or canceled check to verify the purchase date and warranty eligibility.
- Keep the original packaging for potential warranty returns.
Exclusions:
- Damage due to improper cleaning, misuse, or lack of maintenance as outlined in the manual.
- Wear and tear on parts like needles, nozzles, seals, packings, and O-rings.
- Usage of non-Iwata standard replacement components.
- Shipping costs for warranty service are the responsibility of the owner. Airbrush can be shipped back to SprayGunner for diagnostics and repairs.
Limitations:
- This warranty excludes problems due to normal wear or misuse and does not cover incidental or consequential damages.
- Routine cleaning and maintenance are required to maintain the warranty.
Please note that failure to perform general maintenance, including cleaning, will void the warranty. This warranty replaces all other expressed or implied warranties.
SprayGunner Return Policy for Iwata Airbrushes
30-Day Hassle-Free Returns:
SprayGunner offers a 30-day hassle-free return policy for all Iwata airbrushes. Customers can return the product for any reason within this period for a full refund or exchange, with no questions asked. Just send us a message to sales@spraygunner.com
Extended Returns for Store Credit:
For returns initiated within 60 days after delivery, customers can choose to receive their refund as a store credit, offering additional flexibility.
Return Shipping:
- For customers in the lower 48 states: SprayGunner provides free return shipping, making the process easy and cost-effective.
- For customers outside the lower 48 states, including overseas: Customers are responsible for obtaining a return shipping label. These can be purchased through local carriers or directly from SprayGunner.
This policy ensures that purchasing an Iwata airbrush from SprayGunner is a risk-free and customer-friendly experience.
SprayGunner Achieves Platinum Crown Dealer Status with Iwata - A New Milestone in Excellence
At SprayGunner, we are thrilled to announce that we have been awarded the prestigious Platinum Crown Dealer status by Iwata. This esteemed recognition is a testament to our commitment to providing our customers with the highest quality airbrushes, compressors, accessories, and parts from Iwata. As a Platinum Crown Dealer, we proudly carry the entire range of authentic Iwata products and offer fast shipping across the nation.
What is the Iwata Crown Dealer Program?
Understanding the Crown Dealer Tiers: Iwata’s Crown Dealer program is designed to recognize and reward dealers who demonstrate a commitment to excellence in offering Iwata products. Dealers are awarded crowns based on the percentage of total Iwata items they carry. The tiers are:
- Bronze Crown Dealer: Represents dealers who carry a select range of Iwata products.
- Silver Crown Dealer: Recognizes dealers with a broader selection of Iwata items.
- Gold Crown Dealer: Awarded to dealers who carry a substantial range of Iwata products.
- Platinum Crown Dealer: The highest tier, reserved for dealers who carry the complete range of authentic Iwata products and excel in service and support.
This is what SprayGunner can offer our awesome customers:
Comprehensive Product Range: As a Platinum Crown Dealer, SprayGunner offers the full spectrum of Iwata products. From top-of-the-line airbrushes and compressors to essential accessories and parts, our inventory includes everything you need for your airbrushing projects. Whether you’re a professional artist or a hobbyist, you can trust that we have the right tools to meet your needs.
Authentic Iwata Products: Our Platinum status assures customers that all Iwata products available at SprayGunner are 100% authentic. We are committed to providing only genuine products that meet Iwata’s high standards of quality and performance.
Expert Knowledge and Support: Our team at SprayGunner is well-versed in Iwata products and airbrushing techniques. As a Platinum Crown Dealer, we are equipped to offer expert advice and support to help you select the right products and achieve the best results in your projects.
Fast Nationwide Shipping: One of the benefits of our Platinum status is our ability to offer fast shipping across the nation. We understand that timely delivery is crucial, and we are dedicated to ensuring that your Iwata products arrive quickly and safely, no matter where you are in the country.
Explore Our Range of Iwata Products
At SprayGunner, we are proud to offer the full range of Iwata airbrushes, compressors, accessories, and parts. Our Platinum Crown Dealer status is a mark of our dedication to quality and customer service, ensuring that you receive the best products and support in the industry.
Discover the full range of Iwata products at SprayGunner and enjoy the confidence that comes with purchasing from a Platinum Crown Dealer. Shop now at SprayGunner for the best selection, competitive prices, and expert advice.
We are excited to continue serving the airbrushing community with the highest standards of quality, expertise, and support. Thank you for choosing SprayGunner, and we look forward to helping you achieve your creative goals with the finest Iwata products.
Best Price Guaranteed
At SprayGunner, we are committed to offering you the best price in the USA. We understand that price isn't just about the product's tag but the total cost you're paying at checkout. That's why our Best Price Guarantee ensures that when you shop with us, you're getting the best overall value.
Here's how it works:
- Total Price Match: If you find the same product offered by a competitor at a lower total price (including item cost, shipping, and any additional fees), we'll match or beat that price. For example, if we sell a product for $100 with free shipping, and a competitor sells it for $95 but charges $10 for shipping, our offer is still the best because the total cost is lower. However, if you happened to find this item for $95 with free shipping, we would be interested to make our deal even sweeter for you!
- How to Claim: Simply provide proof of the competitor's lower total price (including shipping costs and any applicable fees) at the time of purchase, best if you provide both: link and screenshot sent to sales@spraygunner.com and we will take it from there.
- Eligibility: The competing offer must be for the identical product and in stock, available to ship immediately in the USA. The offer must be from a retailer authorized by the manufacturer to sell the product. Please note, that we will consider reputable sellers but if you found something on eBay coming from outside the country - that's a high-risk purchase and not the offer for us to compete with.
- Exclusions: Price matches are not available for items sold by auction sites, refurbished or used products, or promotional offers such as flash sales or limited-time discounts.
With SprayGunner, you can shop confidently knowing you're getting the best price — guaranteed.
Experienced airbrush users who demand absolute precision and unmatched extreme detail spray choose Iwata Custom Micron Series airbrushes. Every Custom Micron head system is custom matched and hand-tuned to meet Iwata’s rigorous performance standards for superior atomization. Custom Micron is a one-of-a-kind airbrush experience with superb handling for extreme detail.
To maintain your Custom Micron at its peak performance, proper care and attention must be observed.
FEATURES
CUSTOM MATCHED HAND-TUNED HEAD SYSTEM
Every Custom Micron head system is custom matched and hand tuned to meet Iwata’s rigorous performance standards for superior atomization.
A custom matched head system (#1) consists of four parts — needle crown cap (#1A); nozzle cap (#1B); nozzle (#1C); and the head nozzle base (#1D) — which are hand-tuned to work together. These components and the custom matching process create the Custom Micron’s exacting performance.
ERGONOMIC MAIN LEVER
The ergonomic main lever enhances comfort during use for greater ease, control and less finger fatigue.
IWATA PISTOL-GRIP FILTER
Attaching directly to your airbrush and comfortable to hold, the Iwata Pistol-Grip Filter assists in delivering clean, dry air through its super-fine 5-micron filter. Built up moisture is evacuated through a spring-loaded release valve.
MAIN LEVER ADJUSTMENT
The needle spring adjuster (#8) gives you full control over the feel of the main lever’s back and forth movement. The more you tighten, the greater the main lever resistance. The looser it’s adjusted, the smoother the main lever will feel. Adjust to what feels comfortable to you.
NEEDLE TENSION ADJUSTMENT CUTAWAY
Using a small screwdriver you can easily adjust the needle packing screw (PTFE) (#4) to add or release tension on the needle to customize your Custom Micron experience.
CROWN CAP (#1A)
The crown cap physically protects the needle while spraying very fine lines. When spraying larger areas or stippling with the Custom Micron, we suggest removing the crown cap and screwing it onto the crown cap dock.
PRESET WITH CROWN CAP DOCK (#12)
A preset is a threaded adjusting screw mounted behind the handle which limits the distance the main lever can be pulled back. This provides accurate paint volume control and is especially useful for repetitive, precision work.
When stippling or for any reason you have to remove your crown cap, simply screw it onto the crown cap dock located at the end of the preset so it doesn’t get lost.
QUICK FLUSH CUTAWAY HANDLE (#11B) (CM-C PLUS AND TAKUMI - OPTIONAL FOR CM-B AND CM-C)
The quick flush cutaway handle allows quick paint clog removal without removing the handle or needle.
1. Grip the exposed needle chucking nut (#10) with your fingers.
2. Pull it back while simultaneously depressing the main lever.
3. Repeat this process several times until the airbrush is clog free and spraying normally.
• The increased paint flow past needle and nozzle tip removes many clogs.
• Don’t let the needle “snap” back into place. This could damage the nozzle.
MICRO AIR CONTROL (MAC) VALVE (CM-C PLUS ONLY)
The MAC Valve enables infinite airflow control at the airbrush’s head providing control between stipple, extreme detail and medium spray characteristics.
• Spray coarse stippling effects and increase to full atomization in a quick turn.
• Fine tune the airflow.
• Maximize paint atomization control.
• Open the valve fully during cleaning. The higher pressure pulls more paint through the airbrush.
GETTING STARTED
COMPRESSOR
The Custom Micron does not require a high pressure air source for most applications because lower pressures are best suited for ultra-fine, slow, high-detail spraying, ideally between 12 and 15 psi. Realizing the Custom Micron’s full benefits requires an adjustable or regulated air source with an air storage tank. Other compressor considerations include the length of use while spraying and the environment, or amount of space, you spray in.
ASSEMBLY
1. Screw the air hose onto the compressor.
2. Screw the air hose onto the airbrush.
3. Adjust the pressure to between 12 and 15 psi to start.
4. Check for any air leaks in the compressor or air hoses.
5. Place a few drops of cleaning solution or water into the airbrush’s bowl.
6. Point the airbrush away from you.
7. Press down on the main lever (#13) to start airflow through the airbrush.
8. Pull the main lever back, opening the airbrush’s nozzle, spraying the water or cleaning solution to see how the Custom Micron sprays.
PAINT PREPARATION
For non-specific airbrush paints, proper preparation, including filtering the paint through a nylon mesh, is critical for best performance. Thin paint with its proper solvent, and make repeated passes across the work to build up the color. This improves your work’s quality and decreases your airbrush’s cleaning time.
• Custom Microns spray very thin paint best.
• Thin paint with its proper solvent.
• Filter paint through paint filters or mesh.
⚠︎ CAUTION
• Always spray in well ventilated areas.
• Do not spray solvent based (flammable) paints around open flames.
• Use the appropriate respirator to safely filter out paint vapors particular to your specific paint type.
• Wear eye protection to prevent paint contact with eyes.
• Never exceed the airbrush’s pressure limit (98 psi).
GENERAL OPERATION
AIR PRESSURE
Working pressures can vary depending on the type of surface, the desired spray texture and the paint’s viscosity.
Try using 12-15 psi to take full advantage of the Custom Micron’s unique, spray characteristics.
⚠︎ WARNING
Do not exceed 98 psi.
FINE-LINE SPRAY
1. Depress the main lever (#13) to start airflow.
2. Position the airbrush close to the surface, between 1/16 and 1/2 inch.
3. Pull the main lever back slightly to start paint flow.
• A longer distance to the surface produces wider lines.
• A shorter distance to the surface produces narrower lines.
• Increased air pressure increases spray width.
• Decreased air pressure decreases spray width.
• The smallest lines are determined by skill and practice.
⚠︎ CAUTION
The needle and nozzle are very delicate. Even a slight bend on the needle’s tip adversely effects the spray pattern.
WIDE-LINES AND BLENDING
1. Depress the main lever (#13).
2. Position the airbrush from 1/2 to 6 inches away from the surface.
3. Pull the main lever back much further to release more paint to cover the bigger area.
• A longer distance to the surface produces wider lines.
• A shorter distance to the surface produces narrower lines.
• Increased air pressure increases spray width.
• Decreased air pressure decreases spray width.
• The Custom Micron’s maximum usable line width is approximately 1-1/2 inches.
STIPPLING
Iwata airbrushes are designed to produce a wide range of stippling textures.
1. Unscrew the crown cap (#1A) and screw onto the cap dock located on the end of the preset handle (#12).
2. Unscrew the nozzle cap (#1B).
3. Adjust the air pressure between 5 and 30 psi.
• Low air pressure creates coarse stipples.
• High air pressure provides fine stipple effects.
• Paint viscosity also effects stippling texture.
MAINTENANCE
CLEANING THE AIRBRUSH BETWEEN COLORS
1. Dump out the excess paint from color cup.
2. Rinse the cup with the appropriate cleaning solution.
3. Wipe out any leftover paint with paper towel.
4. Spray cleaner through the airbrush until it sprays clear.
5. Add the next color to the color cup.
6. Repeat cleaning procedure when finished.
CLEANING THE NEEDLE
1. Unscrew and remove the back handle (#11).
2. Loosen the needle chucking nut (#10) by hand.
3. Pull the needle (#9) out.
4. Clean the needle with a damp soft cloth by wiping only towards the sharp needle point.
⚠︎ CAUTION
Needles are extremely sharp and delicate. Be careful not to drop or damage your needle while cleaning. Only wipe the needle in a back to front direction so as not to puncture yourself.
5. With main lever depressed, gently re-insert the needle so as not to damage the sharp tip. The needle is fully seated when it comes to a complete stop.
⚠︎ WARNING
Do not use excessive force.
6. Tighten the needle chucking nut by hand to hold needle in place.
⚠︎ WARNING
Do not over tighten.
7. Pull the main lever back and forth to visually confirm the needle’s ability to move.
8. Screw the handle back on to the airbrush.
⚠︎ WARNING
The most probable time to damage the needle is when the needle passes through the main lever (#13) and through the needle packing set (#4).
If the needle stops abruptly, retract and examine the main lever mechanism for proper assembly and re-insert the needle.
BEFORE EACH SESSION
Spray water or the appropriate paint solvent through the airbrush to make sure the airbrush is working properly.
AFTER EACH SESSION OR IF YOUR AIRBRUSH IS CLOGGED
1. Increase the air pressure.
2. Spray cleaning solution for a short time.
3. Clean the needle if necessary.
This cleaning method helps clean the paint passage, the nozzle, and the needle thoroughly.
⚠︎ CAUTION
NEVER soak your entire airbrush in any liquid. NEVER store your airbrush with spray medium or cleaning agents in the fluid cup.
LUBRICATING THE NEEDLE PACKING (PART OF #4)
If your main lever (#13) does not move backward and forward smoothly, lubricate the needle packing (#4) with Iwata Lube.
1. Unscrew the handle (#11).
2. Loosen the needle chucking nut (#10).
3. Remove the needle (#9).
4. Place only one drop of Iwata Lube where the taper of the needle begins and spread evenly around tapered edge.
5. Depress the main lever, then reinstall the needle gently into the airbrush until you feel a positive stop.
6. Tighten the needle chucking nut.
7. Screw the handle onto the airbrush body.
⚠︎ CAUTION
DO NOT over-lube the needle; transferring excess lube into the nozzle may cause severe paint flow problems.
DO NOT use light machine oil or WD-40 for lubrication. These lubes cause the needle to stick when it moves through the needle packing and can also get into the air system.
LUBRICATING THE AIR VALVE O-RING (#14B)
If your main lever (#13) is slow to rise, lubricate the air valve O-ring.
1. Unscrew the handle (#11).
2. Unscrew the needle chucking nut (#10).
3. Remove the needle (#9).
4. Unscrew the needle spring adjuster (#8).
5. Remove the needle spring (#7).
6. Remove the needle chucking guide (#5).
7. Pull the main lever up and out.
8. Use tweezers to pull out the air valve piston (#14A).
9. Clean the valve piston with a cotton swab.
10. Clean the hole at the bottom of the main lever housing with a cotton swab. Clean until cotton swab comes out clean.
11. Place 1 drop of Iwata Lube on the blunt end of the needle and insert into the valve piston shaft. Move around to coat the air valve O-ring.
12. Insert the valve piston back into the hole at the bottom of the main lever housing.
13. Place the main lever back into the main lever housing.
14. Press the main lever up and down a few times. It should spring back up smoothly when depressed.
15. Insert the needle chucking guide into the airbrush body.
a. Twist to position the small tab on the auxiliary lever as shown in the parts guide.
16. Place the needle spring over the needle chucking guide.
17. Screw the needle spring adjuster into the airbrush body. The more you screw it in, the greater the main lever resistance. The looser it’s adjusted, the smoother the main lever feel (your personal preference).
18. Push down on the main lever at least once.
19. Push down on the main lever and carefully insert the needle.
⚠︎ CAUTION
This is the most probable time to bend the needle point.
20. Screw the needle chucking nut onto the needle chucking guide.
21. Screw the handle back into the airbrush body.
⚠︎ CAUTION
DO NOT over-lube the air valve O-ring.
DO NOT use light machine oil or WD-40 for lubrication. These lubes cause the needle to stick when it moves through the needle packing and can also get into the air system.
If it becomes absolutely necessary to dismantle the airbrush remember that most situations, unless otherwise directed, do not require tools.
TROUBLESHOOTING PROCEDURES |
||
| Symptom | Problem | Solution |
| Bubbles in color cup or bottle | Loose nozzle cap | Tighten nozzle cap (#1B) finger tight |
|
|
Improper nozzle to body connection * | See head system (#1) to reseat the nozzle |
| Cracked or damaged nozzle | See head system (#1) to replace the head system | |
| Double Line | Dried paint on needle tip (tip-dry) | See Cleaning the Needle |
|
|
Dirty airbrush | See Cleaning the Airbrush Between Colors See Cleaning the Needle |
| Debris on nozzle tip |
See head system (#1) and clean the nozzle (#1C)
|
|
| Bent needle | See needle (#9) to replace needle | |
| Cracked or damaged nozzle | See head system (#1) to replace the head system | |
| Not Spraying | Loose needle chucking nut (#10) | Finger tighten |
|
|
Needle stuck | Pull out / break free the needle |
| Improper air pressure |
See specific compressor instructions to raise or lower the air pressure
|
|
| Paint too thick | See Paint Preparation | |
| Clogged nozzle |
See head system (#1) and clean the nozzle (#1C)
|
|
| Cracked or damaged nozzle | See head system (#1) to replace the head system | |
| Skipping | Dried paint on needle tip (tip-dry) | See Cleaning the Needle |
|
|
Paint too thick | See Paint Preparation |
| Improper nozzle to head nozzle base connection * | See head system (#1) to reseat the nozzle | |
| Dirty airbrush | See Cleaning the Airbrush Between Colors See Cleaning the Needle |
|
| Cracked or damaged nozzle | See head system (#1) to replace the head system | |
| Spattering | Dried paint on needle tip (tip-dry) | See Cleaning the Needle |
| Paint build-up in crown cap | Unscrew crown cap (#1A) and clean | |
| Air pressure too low |
See specific compressor instructions to raise the air pressure
|
|
| Paint too thick | See Paint Preparation | |
| Dirty airbrush | See Cleaning the Airbrush Between Colors See Cleaning the Needle |
|
|
Main Lever Sticks
(Back and Forth) |
Dirty airbrush | See Cleaning the Airbrush Between Colors See Cleaning the Needle |
|
Main Lever Sticks
(Up and Down) |
Paint on air valve packing o-ring (#14B) | See Lubricating the Air Valve O-Ring |
⚠︎ CAUTION
* The most likely time to damage the nozzle (#1C) is upon removal from the airbrush. Because the head system can be removed entirely, the nozzle does not need to be removed at all. If the nozzle is never removed, you do not have to worry about “improper nozzle to head nozzle base connections”.
Nozzle contains Nickel.
REPLACEMENT PARTS AND ACCESSORIES
MATCHED HEAD SYSTEM (#1)
Though engineered to last decades the components may still wear or become damaged and need replacement. If this happens, we recommend replacing the whole head system
to keep the airbrush’s exquisite performance at peak levels. However, replacing only the nozzle can be done by Iwata’s highly trained technical department.
The set includes: needle crown cap (#1A); nozzle cap (#1B); nozzle (#1C); and the head nozzle base (#1D).
1. Unscrew the handle (#11).
2. Loosen the needle chucking nut (#10).
3. Gently pull the needle (#9) part way back. It doesn’t need to be fully pulled out.
4. Unscrew the entire head system.
NOTE: Removing the head system the first time requires a good grip and some torque. Use the Iwata Soft Jaw Pliers or wrap a rubber band around the head system base and use a pair of standard pliers to unscrew it.
5. Screw the new head system onto the airbrush body until finger tight. Tighten a bit more snug with the Iwata Soft Jaw Pliers
⚠︎ Nozzle contains Nickel.
6. Push the needle all the way forward until it seats in place.
7. Tighten the needle chucking nut.
8. Screw the handle onto the airbrush body.
Keep a spare head system on hand for unforeseen accidents.
NEEDLE (#9)
Iwata needles are made with flexible, spring-steel which resists breakage and increases durability.
If the long, tapered, extremely fine needle point becomes severely bent, it must be straightened before pulling it back through the nozzle. If not, the bent needle might damage the nozzle as it’s pulled through.
Keep a spare needle on hand for unforeseen accidents.
⚠︎ CAUTION
• Needles are sharp.
• Needle tips are bent easily.
QUICK DISCONNECT SETS (OPTIONAL ACCESSORY)
A quick disconnect joint is screwed onto the air hose and a quick disconnect adapter is screwed onto each airbrush. When using multiple airbrushes the quick disconnect joint facilitates changing airbrushes on the same air hose quickly.
IWATA CUSTOM MICRON AIRBRUSH SERIES (VERSION 2)
REPLACEMENT PARTS
| # | ITEM DESCRIPTION | PRICE CODE | ITEM # | CM-B | TAKUMI | CM-C | CM-C+ | |
| 1 | Head System | C1 | L | I5351 | ◼ | ◼ | x | x |
| C2 | L | I5352 | x | x | ◼ | ◼ | ||
| 1A | Head Needle Crown Cap | D | I5351D | ◼ | ◼ | ◼ | ◼ | |
| 1B | Head Nozzle Cap | C1 | G | I5351C | ◼ | ◼ | x | x |
| C2 | G | I5352C | x | x | ◼ | ◼ | ||
| 1C |
Head Nozzle
|
C1 | H | I5351B | ◼ | ◼ | x | x |
| C2 | H | I5352B | x | x | ◼ | ◼ | ||
| 1D | Head Nozzle Base | J | I5351A | ◼ | ◼ | ◼ | ◼ | |
| 2 | Head Packing | C | I5802 | ◼ | ◼ | ◼ | ◼ | |
| 3A | Takumi Body * | - | - | x | ◼ | x | x | |
| 3B | CM-C Body * | - | - | x | x | ◼ | x | |
| 3C | CM-B Body * | - | - | ◼ | x | x | x | |
| 3D | CM-C Plus Body * | - | - | x | x | x | ◼ | |
| 4 | Needle Packing Screw (PTFE) | D | I5902 | ◼ | ◼ | ◼ | ◼ | |
| 5 | Needle Chucking Guide | C | I1157 | ◼ | ◼ | ◼ | ◼ | |
| 6 | Spring Guide | C | I5903 | ◼ | ◼ | ◼ | ◼ | |
| 7 | Needle Spring | B | I5701 | ◼ | ◼ | ◼ | ◼ | |
| 8 | Needle Spring Adjuster | E | I5751 | ◼ | ◼ | ◼ | ◼ | |
| 9 | Head Needle | C1 | E | I5404 | ◼ | x | x | x |
| C1 | E | I5406 | x | ◼ | x | x | ||
| C2 | E | I5402 | x | x | ◼ | x | ||
| C2 | E | I5403 | x | x | x | ◼ | ||
| 10 | Needle Chucking Nut | B | I5601 | ◼ | ◼ | ◼ | ◼ | |
| 11A | Handle (Preset) | H | I5854 | ◼ | ◼ | ◼ | OPT | |
| 11B | Handle (Preset/Single Cut) | H | I5855 | OPT | ◼ | OPT | ◼ | |
| 12 | Handle Crown Cap Dock (Preset) | E | I5861 | ◼ | ◼ | ◼ | ◼ | |
| 13 | Main Lever | D | I5454 | ◼ | ◼ | ◼ | ◼ | |
| 14A | Valve Piston | B | I5001 | ◼ | ◼ | ◼ | ◼ | |
| 14B | Valve Piston Packing | B | I5801 | ◼ | ◼ | ◼ | ◼ | |
| 15 | Air Valve Set | H | I5101 | ◼ | ◼ | ◼ | ◼ | |
| 15A | Air Valve Body | - | - | ◼ | ◼ | ◼ | ◼ | |
| 15B | Air Valve | - | - | ◼ | ◼ | ◼ | ◼ | |
| 15C | Air Valve Spring | - | - | ◼ | ◼ | ◼ | ◼ | |
| 15D | Air Valve Guide | - | - | ◼ | ◼ | ◼ | ◼ | |
| 16A | Cup Lid | 0.24oz/7ml | E | I5301 | x | x | ◼ | OPT |
| 16B | Cup Lid (Gravity) | 0.24oz/7ml | E | I6181 | x | x | OPT | ◼ |
| 16C | Cup Lid (Siphon Cut) | 0.24oz/7ml | C | I6187 | x | ◼ | x | x |
| 17 | Blanking Cover | A | I0452 | x | ◼ | x | x | |
| 18 | Cup Assembly | 0.24oz/7ml | H | I0710 | x | ◼ | x | x |
| 19 | Cup Adapter (Side-Gravity) | D | I0700 | x | ◼ | x | x | |
| 20 | Cup (Gravity) | 0.24oz/7ml | D | N0702 | x | ◼ | x | x |
| 20A | Cup (Gravity) O-ring | 0.24oz/7ml | A | N0713 | x | ◼ | x | x |
| 21 | Handle O-Ring | A | I6051 | x | ◼ | x | ◼ | |
| 22 | MAC Valve Set | D | I1901 | x | x | x | ◼ | |
| 23 | MAC Valve Packing | A | I1902 | x | x | x | ◼ | |
| 24 | Pistol-Grip Filter | - | FA450 | ◼ | ◼ | ◼ | ◼ | |
| 25 | Spanner | B | I1651 | ◼ | ◼ | ◼ | ◼ | |
| QuickFit Quick Disconnect Set | H | I1603 | OPT | OPT | OPT | OPT | ||
| QuickFit Quick Disconnect Airbrush Adaptor | C | I1604 | OPT | OPT | OPT | OPT | ||
| Airbrush Adapter for Paasche Air Hose | - | J001 | OPT | OPT | OPT | OPT | ||
| Airbrush Adapter for T&C/Badger Air Hoses | - | J002 | OPT | OPT | OPT | OPT | ||
*Replacement parts not available