Por 15 Matte Clear Coat 1 Quart
Includes: Both 1 Quart of Low Sheen Protective Clear Coat (Part A) & 8.6 oz Matte Clear Coat Hardener Activator (Part B)
POR-15 Matte Clear Coat premium quality 2-part coating seals in any color or patina for a custom low sheen look with amazing results. POR-15 Matte Clear Coat is specifically designed to deliver an extreme level of resistance to scuffing and burnishing, and be a leader in waterborne and even traditional matte clear coatings. POR-15 Matte Clear Coat is formulated with a low VOC, Waterborne Polyurethane Clear Coat technology that achieves a low sheen through chemistry and is silica-free. POR-15 Matte Clear Coat has excellent weathering properties and can be used on any substrate that can be cleared with a traditional clear coat.
- Low Sheen Protective Clear Coat
- Consistent Sheen
- Waterborne Polyurethane Clearcoat Technology
- Burnish Resistant
- Non-Yellowing
- Silica-Free
Instructions
DRY TIME:
Dust Free: 55 minutes
Air Dry (Touch) 2 hours
Baking @ 90 °F. 30 minutes
PRODUCT MIXING
Stir Matte Clear Coat before mixing.
2.4:1 Mixing ratio
2.4 parts Matte Clear
1 Part Hardener
Stir well (do not shake)
APPLICATION
CONVENTIONAL - Suggested SPRAY GUN SET UP
1.2 - 1.4 Fluid tip
4 - 8 inch Spray distance
20 - 45 psi Air pressure at regulator
8 - 11 psi at cap
Apply with a 60% overlap 2 full wet coats.
1. Prepare your base as you would most other substrates.
2. Apply 2 full coats or until desired coverage has been achieved.
3. Allow to flash off properly between coats.
4. Allow 15 minutes before baking for 30 minutes @ 90 °F.
- Choosing a selection results in a full page refresh.