Jacquard Airbrush Color Iridescent Electric Blue 4 oz

Jacquard Airbrush Color - Iridescent Electric Blue (4 oz)

Add a luminous, shimmering finish to your projects with Jacquard Airbrush Color Iridescent Electric Blue. This ready-to-spray, water-based fluid acrylic was originally formulated for textiles and is also widely used for sneakers, cosplay, and multi-surface airbrushing. On properly prepared surfaces, it provides flexible adhesion and a vibrant electric blue iridescent effect.

Whether you are working on leather accessories, vinyl, plastic, or fabric projects, Iridescent Electric Blue offers strong color and a reflective finish with excellent versatility. On textiles, it remains soft to the touch and becomes washfast once properly heat set.

Why Choose Jacquard Iridescent Electric Blue?

• Iridescent Finish: Adds a bright, shimmering blue effect for custom work and layered airbrush projects.
• Ready-to-Spray: Formulated for smooth spraying directly from the bottle with minimal tip-dry and clogging.
• Versatile Adhesion: Works well on properly prepared surfaces including leather, vinyl, plastic, rubber, wood, paper, clay, and metal.
• Studio-Friendly Formula: Water-based fluid acrylic for textile and multi-surface airbrush applications.

Technical Specifications & Application Guidelines

Instructions for Professional Results

1. Surface Preparation: Ensure the surface is clean before painting. For leather and fabric, wash thoroughly to remove dirt, waxes, sizings, and conditioners. Non-porous surfaces such as plastic and metal may require light sanding. Bare metal may require a primer. For added durability on hard surfaces, apply a compatible varnish after the paint has dried.
2. Application: Apply in light, even coats. Avoid over-saturating the surface. Use approximately 40 PSI, and a nib size no smaller than 0.5 mm. Paints are intermixable for a full range of custom colors.
3. Heat Setting: For hard surfaces, use gentle heat as needed to help cure the paint. For fabric, heat set with a dry iron on the appropriate setting for about 30 seconds.
4. Varnish (Optional): After the paint has completely dried, spray varnish in a light, even coat. Repeat if desired after the first coat has thoroughly dried.

Expert Airbrushing Tips

• Equipment Check: Make sure your airbrush, needle, and compressor are working properly before starting.
• Use the Right Tip Size: A 0.5 mm tip or larger is recommended for consistent flow.
• Do Not Let Paint Sit: Do not leave paint sitting in the airbrush too long without use, as it may begin drying inside the airbrush.
• Keep Bottles Closed: Replace caps after use so the paint does not dry out.
• Thin Only When Needed: Thin slightly with water only if necessary.
• Clean Thoroughly: Clean your airbrush well after each session to maintain smooth performance.
• Test Before Final Application: Always test on the intended surface before full application to confirm the effect and coverage.