By NO-NAME brand

2K Gloss Clear Coat 2oz set by NO-NAME brand

Regular price $17.00 USD
Regular price Sale price $17.00 USD
Shipping calculated at checkout.
Brand: NO-NAME brand
Availability: Out of stock
SKU: NN-CC1A2
Regular price $17.00 USD
Regular price Sale price $17.00 USD

Premium 2K urethane clear lacquer. Excellent hardness, gloss and chemical resistance.

Show Clear Automotive Grade Top-coat for scale-modelers, fishing lure builders, and other creative enthusiasts.

for airbrush with 0.3-0.5mm nozzle use 2:1 clearcoat: activator and reduce at least 2:1

Included:

  • 2oz bottle of show clear
  • 1oz jar of activator
  • 1oz jar of reducer

Can be applied over Zero paints, Gravity colors, Tamiya, Mr. Color and any other solvent or water-based paint.

Great quality product made in US, bottled by NO-NAME Brand in Florida

Based on American Icon clear coat.

Technical Data Info

SURFACE PREPARATION

1. Allow the final coat of basecoat to dry to touch prior to applying C-800 ICON CLEAR.

2. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.

3. Apply C-800 ICON CLEAR. PREVIOUSLY FINISHED SURFACES: 1. Sand surface with P600 wet or dry, and then clean with R-S200 SURFACE CLEANER. REMEMBER TO STIR THIS PRODUCT BEFORE USE. MIXING RATIO 2:1 2 parts C-800 ICON CLEAR to 1 part A-S060, A-M070 or A-F080 ACTIVATOR. NOTE: Substrate temperature for application minimum 50 °F and maximum 100 °F APPLICATION INFORMATION Apply 2-3 full wet coats with 50% overlap. Pot Life 3-5 hours @ 70° F/21° C depending on temperature, humidity and activator selection.

DRY/FLASH TIMES Dry Times at 70°F/21°C 1st Coat Flash Time: 10-15 minutes 2nd Coat Flash Time: 15-20 minutes Dust Free: 30-60 minutes depending on temperature / activator selection Polish / Deliver: 16-24 hours AIR DRY Dry Times: 16-24 hours at 70° F / 21° C Recoat: Repair and recoat after 10-14 hours FORCE DRY PurgeTime: 15 minutes Bake Time: 30 minutes at 140° F / 60° C Recoat: Repair and recoat after 1 hour cool down.

POLISHING AIR DRY

16-24 hours FORCE DRY After 1 hour cool down

CLEAN UP INSTRUCTIONS Clean all equipment immediately after use. At the same time, flush out all fluid lines and carefully clean pressure pots. Use clean solvent only. It is also good practice to periodically clean the spray tip or the fluid tip/air cap combination during the course of the working day or shift. Coating category: Clear coating. Actual VOC does not exceed 4.3 Lb/gal (516 g/L). Regulatory VOC does not exceed 4.3 Lb/gal (516 g/L). RFU VOC does not exceed 4.18 Lb/gal (501 g/L).

INFORMATION: If used as instructed, this product is designed to comply with the US National Volatile Organic Compound (VOC) Emission Standard for Automobile Refinish Coatings. Confirm compliance with state and local air quality rules before use. Rule 102: Photochemically reactive.

SAFETY INFORMATION WARNING: This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm.

DANGER: Flammable liquid and vapor. May cause an allergic skin reaction. Suspected of causing cancer. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. May cause damage to organs through prolonged or repeated exposure.

PREVENTION: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/ protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. Do not breathe dust/fume/ gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. P210 - Keep away from heat/ sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment. Use only nonsparking tools. Take precautionary measures against static discharge. RESPONSE: IF exposed or concerned: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting. In case of fire: Use CO2, dry chemical, or foam for extinction.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)