Iwata NEO CN Airbrush Replacement Parts

NEO CN Parts in This Collection

The collection includes replacement parts for several areas of the Iwata NEO CN, helping make it easier to identify components needed for regular maintenance or repair.

• Needle and nozzle components: Replacement needle, nozzle, needle cap, and nozzle cap parts for servicing the paint-delivery system.
• Gravity-feed cup components: Replacement paint cups and a cup lid for compatible NEO CN configurations.
• Trigger and needle-control parts: Main lever / trigger, needle chucking guide, chucking nut, needle spring, and spring guide components.
• Air-valve components: Valve-set and O-ring parts used in the air-control system.
• Handle and packing components: Replacement handle, handle O-ring, needle packing screw, and PTFE packing parts.

Iwata NEO CN Needle & Nozzle Parts

The NEO CN fluid system includes the Iwata Needle (N3) N0751 and Iwata Nozzle (N3) N0801, along with related cap components used at the front of the airbrush.

If spray behavior changes, inspect the needle and nozzle for visible damage, dried paint, or wear before selecting replacement components. The collection also includes the Iwata Needle Cap N1101 and Iwata Nozzle Cap (N3) N1401.

Always match the needle, nozzle, and related cap components to the correct N3 configuration before ordering.

NEO CN Gravity-Feed Cups & Cup Lid

Replacement paint-cup components are also included for maintaining the gravity-feed system of the NEO CN.

• Iwata Gravity Feed Cup (0.10 oz / 3.0 ml) N0701
• Iwata Gravity Feed Cup (0.24 oz / 7 ml) N0702
• Iwata Gravity Feed Cup Lid (0.24 oz / 7 ml) N0954

Check cup size and part number before ordering so the replacement component matches the paint-cup setup being serviced.

Trigger, Chucking & Needle-Control Components

Several internal components work together to control trigger movement and needle positioning. These parts can be inspected when servicing loose, worn, damaged, or difficult-moving controls.

• Iwata Main Lever / Trigger N1001
• Iwata Needle Chucking Guide N1151
• Iwata Needle Chucking Nut N1201
• Iwata Needle Spring N1351
• Iwata Needle Spring Guide N1701

Small internal airbrush parts may look similar across different models, so confirm the product title and Iwata part number before installation.

NEO CN Air Valve, O-Ring & Packing Components

Replacement parts for the airflow and needle-packing areas include components used to service seals and internal air-control assemblies.

• Iwata Valve Set N0201
• Iwata Handle O-Ring N1051
• Iwata Needle Packing Screw N1251
• Iwata PTFE Needle Packing N1501
• Iwata Air Valve O-Ring N1502

Inspect O-rings and packing components when troubleshooting air leakage, paint leakage around the needle passage, or changes in normal airbrush operation.

Selected Iwata NEO CN Replacement Parts

• Iwata Valve Set N0201
• Iwata Gravity Feed Cup (0.10 oz / 3.0 ml) N0701
• Iwata Gravity Feed Cup (0.24 oz / 7 ml) N0702
• Iwata Needle (N3) N0751
• Iwata Nozzle (N3) N0801
• Iwata Handle N0901
• Iwata Gravity Feed Cup Lid (0.24 oz / 7 ml) N0954
• Iwata Main Lever / Trigger N1001
• Iwata Handle O-Ring N1051
• Iwata Needle Cap N1101
• Iwata Needle Chucking Guide N1151
• Iwata Needle Chucking Nut N1201
• Iwata Needle Packing Screw N1251
• Iwata Needle Spring N1351
• Iwata Nozzle Cap (N3) N1401
• Iwata PTFE Needle Packing N1501
• Iwata Air Valve O-Ring N1502
• Iwata Needle Spring Guide N1701

Product availability may change, so use the individual product title and listed part number as the final reference when selecting a replacement component.

How to Choose the Correct Iwata NEO CN Part

Before ordering an Iwata NEO CN replacement part, identify the component being serviced and compare it with the parts diagram and individual product listing.

• Confirm that your airbrush is the Iwata NEO CN model.
• Use the parts diagram on this collection page as an identification guide.
• Match the Iwata part number whenever one is provided.
• Confirm N3 needle, nozzle, needle-cap, and nozzle-cap compatibility.
• Check paint-cup size before ordering cup or lid components.
• Inspect O-rings, packing, springs, and chucking parts before replacement.
• Do not select internal components based only on appearance.

Maintaining Your Iwata NEO CN

Routine cleaning and inspection can help identify components that need attention before they create larger performance issues. Pay particular attention to the needle, nozzle, paint cup, trigger mechanism, packing, and air-valve system.

• Clean the needle and nozzle after painting sessions.
• Inspect the needle tip before reinstalling it.
• Remove dried paint carefully from the nozzle and front-end components.
• Keep cup threads and sealing surfaces free of dried paint.
• Check O-rings and packing if leakage develops.
• Inspect springs and chucking components if trigger movement changes.
• Reassemble small precision parts carefully and without excessive force.

More Iwata Airbrush Replacement Parts

Need components for another Iwata model? Browse the Iwata Airbrush Parts collection for additional needles, nozzles, caps, valves, springs, seals, handles, cups, and maintenance components.

You can also browse the Iwata Airbrush collection for complete Iwata airbrush models and related series.