-
Vendor:Mission Models PaintsMission Models Paints Color: MMA-001 Polyurethane Mix Additive
Regular price $8.03 USDRegular price -
Sold out
Vendor:Mission Models PaintsMission Models Paints Color: MMA-002 Thinner / Airbrush Cleaner
Regular price $8.03 USDRegular price -
Vendor:Mission Models PaintsMission Models Paints Color: MMA-003 Thinner / Airbrush Cleaner 4oz
Regular price $9.26 USDRegular price -
Vendor:Mission Models PaintsMission Models Paints Color: MMA-004 Flat Clear Coat
Regular price $6.89 USDRegular price -
Vendor:Mission Models PaintsMission Models Paints Color: MMA-005 Semi Gloss Clear Coat
Regular price $6.89 USDRegular price -
Vendor:Mission Models PaintsMission Models Paints Color: MMA-006 Gloss Clear Coat
Regular price $6.89 USDRegular price -
Vendor:Mission Models PaintsMission Models Paints Color: MMS-007 Clear Primer
Regular price $6.89 USDRegular price
Mission Models Thinner is a powerful acrylic non-solvent based reducer.
Only the smallest amount of Mission Models thinner is needed when reducing Mission Models Paint and Primer.
Mission Models Polyurethane Intermix is an acrylic non-solvent based paint additive. After reducing your paint with Mission Models Thinner add one or two drops of Mission Models Polyurethane. Less is more! Mission Models Poly will increase flow from the airbrush, slower drying times, added blending times for fine brush painting, durability and increased leveling properties. In addition you will find a durable finish with a slight eggshell finish which is perfect for washes eliminating the need for further clear coating.
If you add too much Poly to your paint you will find that your paint will pull from the surface and away from raised details, beading etc... If by chance you add too much Poly be patient. It will dry and auto level.
Mission Models Paint is very easy to use. Mission Models recommends thinning to the following ratio for the best performance. Below are some basic examples. For best performance please follow Mission Models carefully researched ratios.
DO NOT MIX 50/50. Mission Models thinner is very powerful and only the smallest amount of thinner is needed. In the mixing cup your reduced paint will appear thicker than what you may be used to. This is normal. Mission Models paint will dry smooth, thin and level. It will not hide the finest of details. Mixed properly you will find a beautiful opaque finish which requires minimal coats.
Below is a sample mixing ratio:
20 to 30% Mission Models thinner to 2 parts paint ( 2 or 3 drops thinner to 20 drops paint plus 2 drops of Poly. Typically 1 part equals 10 drops.)
PSI 10 , 15 , 20 depending on your needs.
TIP: add one or two drops of Mission Models Polyurethane Intermix for additional reduced tip dry when spraying straight from the bottle. Mission Models Poly increases flow, lowers drying times, added leveling, increased blending when brush painting, durability and adds a slight eggshell finish.