Harder & Steenbeck GRAFO Airbrush Parts

Replacement Parts for GRAFO T1, T2 & T3

The GRAFO series was developed around precision and micro-fine airbrush work and uses a distinctive dependent double-action control system. Harder & Steenbeck produced three primary GRAFO configurations, each with a different nozzle and paint-feed setup.

• GRAFO T1: Originally configured with a 0.15 mm FineLine nozzle set and an approximately 1 ml retouching cup.
• GRAFO T2: Originally configured with a 0.2 mm FineLine nozzle set and color cups using a bayonet-style attachment.
• GRAFO T3: Originally configured with a 0.4 mm FineLine nozzle set and two 15 ml glass color containers.

GRAFO Needles, Nozzles & Front-End Components

GRAFO airbrushes use Harder & Steenbeck's self-centering plug-in nozzle system. When replacing precision front-end components, keep the needle, nozzle, and compatible air-cap system correctly matched.

• 0.15 mm components: Associated with the original GRAFO T1 fine-detail configuration.
• 0.2 mm components: Used with the original GRAFO T2 setup.
• 0.4 mm components: Used with the original GRAFO T3 configuration.
• Shared H&S parts: Selected needles, air caps, seals, and other components may also be used by additional Harder & Steenbeck airbrush families.

GRAFO Paint Cups & Feed Components

The three GRAFO models use different approaches to paint delivery, making cup and feed compatibility especially important when selecting a replacement component.

• Retouching cup components: Used with the compact GRAFO T1 configuration.
• T2 cup and collet parts: Replacement metal cups and mounting components are available for the GRAFO T2 system.
• T3 feed components: Replacement body and feed-related parts are available for selected GRAFO T3 configurations.

Always verify the exact T1, T2, or T3 designation before replacing paint-feed hardware.

Quick Fix, Lever & Needle Control Parts

GRAFO airbrushes use a Quick Fix needle-control system along with model-specific lever components. These mechanical parts help control needle movement and paint delivery during operation.

• Quick Fix end pieces: Replacement rear components for maintaining needle-control adjustment.
• Lever components: Replacement lever hardware is available for maintaining the GRAFO operating system.
• Needle springs: Help support consistent needle movement and return.
• Needle-control hardware: Selected shared H&S components may also be used within compatible GRAFO assemblies.

PTFE Seals, O-Rings & Service Components

GRAFO models use replaceable sealing components that help maintain proper airflow and paint isolation. These small parts should be inspected when leaks or changes in spray performance occur.

• PTFE seals: Help maintain sealing around compatible paint-carrying components.
• O-rings: Used at model-specific air-cap, cup, and internal connection points.
• Springs: Replacement internal springs support reliable mechanical operation.
• Shared service parts: Some components are also compatible with Evolution, Infinity, Hansa, or other H&S platforms.

Choosing the Correct GRAFO Replacement Part

Because the GRAFO T1, T2, and T3 use different nozzle and paint-feed configurations, confirming the exact model before ordering is important.

• Identify the GRAFO model: Determine whether you are servicing a T1, T2, or T3.
• Confirm the nozzle size: Match needles, nozzles, and compatible air caps to the correct configuration.
• Check the feed system: Cup, collet, body, and paint-feed components can differ between models.
• Use the manufacturer part number: Part numbers help distinguish visually similar Harder & Steenbeck components.

GRAFO Airbrushes & Harder & Steenbeck Parts

For GRAFO model information, visit the Harder & Steenbeck GRAFO Airbrush collection .

For replacement components covering additional Harder & Steenbeck models, explore the Harder & Steenbeck Airbrush Parts collection .