Por- 15 Matte Clear Coat 1 Quart

Por 15 Matte Clear Coat 1 Quart

Includes: Both 1 Quart of Low Sheen Protective Clear Coat (Part A) & 8.6 oz Matte Clear Coat Hardener Activator (Part B)

POR-15 Matte Clear Coat premium quality 2-part coating seals in any color or patina for a custom low sheen look with amazing results. POR-15 Matte Clear Coat is specifically designed to deliver an extreme level of resistance to scuffing and burnishing, and be a leader in waterborne and even traditional matte clear coatings. POR-15 Matte Clear Coat is formulated with a low VOC, Waterborne Polyurethane Clear Coat technology that achieves a low sheen through chemistry and is silica-free. POR-15 Matte Clear Coat has excellent weathering properties and can be used on any substrate that can be cleared with a traditional clear coat.

• Low Sheen Protective Clear Coat
• Consistent Sheen
• Waterborne Polyurethane Clearcoat Technology
• Burnish Resistant
• Non-Yellowing
• Silica-Free

Instructions

DRY TIME:

Dust Free: 55 minutes

Air Dry (Touch) 2 hours
Baking @ 90 °F. 30 minutes

PRODUCT MIXING

Stir Matte Clear Coat before mixing.

2.4:1 Mixing ratio
2.4 parts Matte Clear
1 Part Hardener
Stir well (do not shake)

APPLICATION

CONVENTIONAL - Suggested SPRAY GUN SET UP

1.2 - 1.4 Fluid tip

4 - 8 inch Spray distance
20 - 45 psi Air pressure at regulator
8 - 11 psi at cap
Apply with a 60% overlap 2 full wet coats.
1. Prepare your base as you would most other substrates.
2. Apply 2 full coats or until desired coverage has been achieved.
3. Allow to flash off properly between coats.
4. Allow 15 minutes before baking for 30 minutes @ 90 °F.