BLACK FRIDAY SPECIAL! American Icon Graphene Ceramic Coating 1140 Pro Kit & Sanding Set

BLACK FRIDAY SPECIAL! American Icon Graphene Ceramic Coating 1140 Pro Kit & Sanding Set

This incredible set comes with an American Icon Graphene Ceramic Coating 1140 Pro Kit, a kit of Mirka Galaxy 6" Grip Multifit Discs in 2000 grit, and a Mirka Multi-Hole Grip Faced Interface Pad 6"x.39" 67H 5/Pkg set. Get it while supplies last!

About the products:

American Icon Graphene Ceramic Coating 1140 Pro Kit

The more versatile Graphene Ceramic Coating that outperform the competition. American Icon Graphene Ceramic Coating is a long lasting professional grade formula that is easy to apply. Formulated and made in the USA.

Formulated to incorporate graphene oxide, American Icon Graphene Ceramic Coating 1140 Pro creates a more durable glass-like coating on the vehicle surface to add additional UV and stain protection while improving appearance.

This advanced formula is suitable for all surfaces including all paint, glass, chrome, plastic/trim, headlights, wheels, and even wraps.

With twice the activity of standard ceramic formulations American Icon Graphene Ceramic Coating 1140 Pro can be used for gelcoats on Boats and RV applications, as well as on automotive clear coats.

FEATURES:

• 10H Hardness, 9+ Years of Protection
• Less prone to water spotting
• High stain resistance against bugs, saps, droppings, etc.
• High scratch resistance during the washing process
• Easier to apply than other Ceramic Coatings
• Increased depth and clarity to all surfaces
• Lower sliding angle with water evacuating at angles less than 10-15°
• Higher contact angles averaging 114°
• UV Tracing Technology™

Instructions

Prep Surfaces

Thoroughly clean to remove old waxes, sealers, tar, iron, and other contaminants. Embedded contaminants should be removed with a clay bar/glove and non-waxed lubricant. Remove scratches with a non-waxed/non-sealant compound and polish the surface to remove defects. Wipe all surfaces with American Icon R-S200 Surface Cleaner or an IPA prep solution for ceramic coatings.

How to apply

Shake well before and during use. Saturate the low nap microfiber towel a suede applicator or similar with numerous drops of material from the dripper bottle. Apply the coating to a 3x3 ft square area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Allow the coating to cure for 1-2 minutes and gently remove excess product using a clean low nap microfiber towel or suede cloth. Do NOT allow coating to come in contact with water for 24-48 hours while curing - if it does, remove water promptly. Apply additional coats with at least one hour between applications or immediately following a single pass around the vehicle. Do NOT apply in direct sunlight or to a hot surface. Cure time is dependent on environmental conditions - test product on a small inconspicuous area first to gauge cure time. Wait 7 days after application to wash vehicles.

Maintenance

Use American Icon Graphene Ceramic Refresh Spray to Boost and maintain the Graphene Ceramic Coating 1140 Pro after every wash and polish.

Mirka Galaxy 6" Grip Multifit Discs

The ceramic grains of the Galaxy are engineered not to dull, as once the edge of the abrasive grain breaks off it simply forms new edges, making it possible for the Galaxy to continue cutting – from edge to edge. The self-sharpening ceramic grains allow for a winning combination of long life, fast cut and easy polishability. Thanks to the optimized Multifit hole configuration, the abrasive is always correctly placed on any machine without the need to specifically align it. At its core, the Mirka Galaxy is a multi purpose product, suitable for the sanding of both soft and hard materials as well as various substrates. Superb edge wear resistance, excellent clogging resistance, dust repellent coating, and optimal dust extraction - the Mirka Galaxy serve well in the automotive sector, in vehicle manufacturing, collision repair, marine production as well as in the wood sector.

Suited For:

Automotive Refinishing
Wood Processing
Marine Industy
Vehicles Manufacturing
Suitable Materials:

Hard Wood
MDF / HDF
Mild Steel / Carbon Steel
Non-ferrous Metal
Paint Stripping / removal
Paint Sanding
Lacquers
Plaster / Putty
Plastics
Body Filler
Primer
Solid Surface
Soft / Resinous Wood
Stainless Steel
Steel
Synthetic Materials
Veneer
Chipboard
Composites
Glass Fiber
Technical Specifications:

Grain: Ceramic/Aluminum Oxide
Color: Blueish
Backing: Polyester Film
Bonding: Low VOC Resin System
Grit Range: 40-2000
Coating: Semi-open

Mirka Multi-Hole Grip Faced Interface Pad 6"x.39" 67H 5/Pkg

This grip faced interface pad is a medium density pad. It is 6 inches in diameter, has multiple holes, and works with Abranet abrasives.

The multi-interface pad is used in combination with hook and loop sanding discs for sanding rounded surfaces and contours, with Mirka® net products. Using the multi interface pad will also produce a softer result. The multi-interface pad is placed between the backing pad and the sanding disc.