Liquid Kicks: Intercoat Clear

Liquid Kicks Leather Intercoat by LK Shoes

Liquid Kicks: Intercoat Clear is a revolutionary product designed to enhance and protect your artwork. This water-based acrylic coating is made from powerful resins that dry to a clear film, providing a barrier between layers of paint and preventing chemical reactions and bleeding. With Intercoat Clear, you can paint with confidence, knowing that any mistakes can be easily erased without damaging the underlying artwork.

This 2 oz. bottle of Intercoat Clear is perfect for artists working on portraits or any detailed artwork. Simply apply two coats of Intercoat Clear and once it is fully dry, you can paint intricate details without worrying about mistakes. The Intercoat layer acts as a protective shield, allowing you to easily correct any errors. Best of all, Intercoat Clear is compatible with solvent-based paints, making it versatile for various applications.

Preparation: All coats of paint under the Intercoat MUST BE TOTALLY DRY before applying Intercoat. Remove all dust before applying. Do not use it as a primer.

Application: Apply Intercoat in two to three coats with an airbrush or a soft paintbrush. Begin with one light coat. Dry this coat quickly after applying by using a hairdryer until the surface is dry. DO NOT USE A HEAT GUN, it can burn the Intercoat. Before applying the next coat, make sure the surface feels cool to the touch. Apply the second coat as a medium wet coat and then dry it quickly with a hairdryer. Application of a third coat is only recommended if you do not plan to add any further coats of paint or expect to do heavy erasing.

Stencil blocking: Intercoat is also intended for extremely clean stenciling. Use of Intercoat after applying a stencil will dramatically reduce stencil problems such as lifting and bleed. To use as a stencil blocker, apply stencil vinyl on a fully prepped and dried surface. Make sure stencil is completely laid down flat without air pockets and then apply two very light coats of Intercoat and allow to air dry for 10 minutes. Apply colors to stenciled areas and allow to dry. Remove stencil and apply one more light coat of Intercoat to melt the paint edge so there won't be any high edges from the tape.

Converting coatings: Some situations may require paint to be stronger than it was made to be. Certain inks have a binder that is too weak to be used on flexible surfaces. To enhance the strength of the ink, add 1 to 3 drops of intercoat to 10 drops of ink, mix, and spray. Compatible with all water-based paints.

Migration prevention: The chemistry of our intercoat makes it capable of drying quickly and forming a barrier between two paints that would normally cause migration together. Example: candy paint and white. Intercoat is nonreactive and will block most dyes and paints from affecting the next layer. Two or three light coats are required.

Please note that Intercoat Clear does not contain UV blockers and is not as flexible or scratch-resistant as our topcoats, so it should not be used as a topcoat.

Overall, Liquid Kicks: Intercoat Clear is a valuable tool for artists who want to enhance the quality and durability of their artwork. It provides a protective layer that allows for easy error correction and prevents unwanted reactions between layers of paint. With Intercoat Clear, you can take your artwork to new heights.