null

Paasche Vision TGX-2F

(1 review) Write a Review
SKU:
TGX-2F
UPC:
026614154809
MPN:
TGX-2F
Availability:
Usually ships in 24 hours!
Gift wrapping:
Options available
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
  • Paasche Vision TGX-2F TGX-2F Paasche
$164.00
Frequently bought together:

Description

Paasche TGX-2F Vision Airbrush Set

The Vision airbrush is in Paasche Talon line.  This means that it can use all of the same heads that the TG or TS airbrushes use including the Fan Aircap.  The Vision will come installed with our new .2mm head, hand polished hardened stainless steel needle, sloped trigger, air atomization control and the black chrome plating.  The Vision will be the finest detail airbrush in Paasche's line.

Features:

  • Double action
  • Gravity feed
  • .2mm head
  • New trigger design
  • Hand polished needle
  • Atomization control
  • Black chrome finish
  • Can also use larger Talon heads

Includes:

  • Paasche TGX-2F Airbrush with .2mm Head
  • Metal case
  • .66mm Fluid Tip
  • .66mm Aircap
  • Fan Aircap
  • Tip Wrench
  • Allen Wrench
  • Instruction Manual
View AllClose

Additional Information

Feed Type:
Gravity
Nozzle Size:
2-in-1(0.2mm + 0.66mm)
Trigger Control:
Double Action
Color Cup Size:
7ml
Nozzle Type:
Threaded
Feature:
Needle Travel Adjustment, Air Pressure Adjustment, Metal Storage Case, Fan Cap for 0.66mm Nozzle/Needle, Black Chrome Plated
View AllClose

1 Review

  • 3
    Paasche Vision TGX-2F

    Posted by Unknown on Oct 01, 2020

    The Vision brush I ordered from Spraygunner had a bent needle. Also, there was an air leak at the adjustable valve and at the trigger valve. I returned the airbrush to the manufacturer and they quickly sent another Vision airbrush. The adjustable valve does not leak, but there is still air escaping at the trigger valve when trigger is depressed. I have an Iwata HP-CR (2) and neither have an air leak. I am presuming that this is just engineered into the design. In addition, I noticed the workmanship on the outside body of the airbrush. There are many marks or slight gouges on the body of the brush (I have photos). It has been coated over with the black chrome-plating so it is not that obvious. I did not notice any marks on the returned airbrush. When testing the brush, yes, it works as described, although I have not used the fan cap yet. This is the reason I give it 3 stars.

View AllClose