Alpha Model 1/43 Ferrari 296 GT3 Version A Full Resin Model Kit
Couldn't load pickup availability
Alpha Model 1/43 Ferrari 296 GT3 Version A Full Resin Model Kit
Build the Ferrari 296 GT3 Version A in compact 1/43 scale with this Alpha Model full resin kit. The model captures the race carās widened bodywork, deep front splitter, sculpted fenders, large rear wing, extended diffuser, competition cockpit, wheels, glazing, and detailed aerodynamic surfaces.
Key Features
- Official Alpha Model product code AM43-0009A.
- Builds a 1/43 scale Ferrari 296 GT3.
- Version A release with a dedicated kit and decal configuration.
- Full resin racing-car model kit with high-precision detailing.
- Includes photo-etched detail parts.
- Includes decals, wheels, and clear glass parts.
- Includes detailed interior, exterior, and structural components.
- Designed using references from the full-size race car.
- Supplied unassembled and unpainted.
Product Specifications
| Brand | Alpha Model |
|---|---|
| Vehicle | Ferrari 296 GT3 |
| Vehicle Brand | Ferrari |
| Kit Version | Version A |
| Scale | 1/43 |
| Product Type | Full resin automotive racing model kit |
| Product Code | AM43-0009A |
| Primary Material | Resin |
| Photo-Etched Parts | Included |
| Decals | Included |
| Wheels | Included |
| Clear Glass Parts | Included |
| Interior Detail | Included |
| Exact Racing Livery | Verify the physical Version A decal sheet |
| Assembly Required | Yes |
| Painting Required | Yes |
| Finished Model Included | No |
Ferrari 296 GT3 in 1/43 Scale
The Ferrari 296 GT3 adapts the basic form of the 296 GTB for competitive GT racing. The road carās compact proportions are reshaped around wider bodywork, additional cooling, racing aerodynamics, safety requirements, and a driver-focused competition cockpit.
Alpha Model recreates the race car in compact 1/43 scale, offering a detailed resin-building project that requires less display space than a larger automotive kit.
Version A Configuration
AM43-0009A is Alpha Modelās Version A release. The version identifies the manufacturerās kit and decal configuration rather than a separate Ferrari vehicle model.
Check the physical decal sheet, packaging, and instructions before adding a team name, race number, driver, event, or championship to the Shopify listing.
Race-Developed Aerodynamic Bodywork
The Ferrari 296 GT3 is distinguished by widened fenders, a deep front splitter, sculpted side channels, cooling openings, a large rear wing, and an extended rear diffuser.
Test-fit the splitter, diffuser, rear wing, body panels, and smaller aerodynamic components before painting so their spacing and alignment can be corrected before the final finish is applied.
Full Resin Construction
The primary components are produced in premium resin, allowing the racing body, vents, aerodynamic surfaces, cockpit forms, and smaller details to retain crisp shapes at 1/43 scale.
Wash and inspect the resin components before assembly. Dry-fit the body, cockpit, wheels, glazing, splitter, diffuser, rear wing, and smaller components before applying primer, paint, or adhesive.
Photo-Etched Detail Parts
Photo-etched parts are included for small components that benefit from thin edges and sharply defined metal surfaces.
Handle the metal parts with fine tweezers and use an adhesive suitable for joining photo-etched metal to resin or painted surfaces.
Decals and Racing Markings
Decals are included for the intended Version A racing presentation. Review the physical decal sheet and placement guide before beginning the body finish.
Apply decals over a smooth gloss surface to reduce visible carrier film. Test decal solutions before applying markings across vents, panel lines, wheel arches, wing elements, or compound curves.
Detailed Competition Cockpit
The kit includes detailed interior and structural components for reproducing the driver-focused competition cockpit.
Prepare the seat, dashboard, steering controls, safety equipment, interior panels, and smaller cockpit pieces as a separate subassembly before installing them inside the body.
Wheels and Final Stance
Dry-fit the wheel assemblies before permanent installation so the ride height, wheel position, track width, and alignment can be checked.
Confirm that all four wheels contact the display surface evenly and sit correctly within the widened wheel openings.
Clear Glass Parts
Clear glass parts are included for the transparent areas of the model. Test-fit these components before completing the final body finish.
Use a clear-part-safe adhesive during final assembly to reduce the risk of fogging, staining, or visible surface damage.
Body Preparation and Painting
Check the resin body for mold-release residue, casting seams, and small imperfections before applying primer.
Use thin, resin-compatible primer and paint layers so the vents, panel lines, wing edges, diffuser, and aerodynamic surfaces remain visible at 1/43 scale.
Planning a 1/43 Racing Build
Divide the project into the body, cockpit, wheels, glazing, rear wing, photo-etched parts, decals, and smaller aerodynamic components.
Completing these sections as separate subassemblies will make surface preparation, masking, painting, decal work, and final alignment easier.
Version Notice: The āAā in AM43-0009A identifies Alpha Modelās Version A configuration. Confirm the physical decal sheet before adding a team, number, driver, event, or exact racing livery.
Scale Notice: This kit is produced in 1/43 scale. Do not use copied 1/24 wording that may appear in image labels or unrelated product descriptions.
Model Kit Notice: This product is an unassembled and unpainted scale model kit. It is not a completed die-cast or ready-to-display model.
Build Notice: Resin preparation, test-fitting, sanding, drilling, trimming, and minor adjustment may be required. Use suitable respiratory and eye protection when cutting or sanding resin.
Product Notice: Paint, primer, adhesive, modeling tools, sanding supplies, decal solutions, clear coat, and a display case are not listed as included.
Recommended For
- Ferrari scale-model collectors
- Ferrari 296 GT3 enthusiasts
- GT3 and endurance-racing model builders
- 1/43 automotive model builders
- Collectors with limited display space
- Modelers experienced with small resin components
- Builders comfortable with photo-etched parts and decals
- Race-car airbrushing and fine-detail projects
Frequently Asked Questions
What scale is Alpha Model AM43-0009A?
AM43-0009A is produced in 1/43 scale.
What does Version A mean?
Version A identifies Alpha Modelās kit and decal configuration. Confirm the physical decal sheet before publishing a team, number, driver, event, or exact racing livery.
Is this a full resin model kit?
Yes. AM43-0009A is a full resin racing-car model kit.
Are photo-etched parts included?
Yes. Photo-etched detail parts are included.
Are decals, wheels, and clear parts included?
Yes. Alpha Model lists decals, wheels, and clear glass parts among the included components.
Does the kit include cockpit detail?
Yes. The kit includes detailed interior, exterior, and structural components.
Which racing livery is included?
Check the physical Version A decal sheet and packaging before publishing a specific livery, race number, team, or driver.
Is the model assembled and painted?
No. This is an unassembled and unpainted scale model kit.
Are paint and adhesive included?
Paint, primer, adhesive, and modeling tools are not listed as included.
Is this suitable for a first resin model kit?
The compact components and photo-etched details make it better suited to builders who already have experience with resin preparation, test-fitting, decals, and fine-detail assembly.
Explore More Scale Modeling Products
Browse more premium automotive kits in the Alpha Models collection, explore additional subjects in Car Model Kits, or find more projects in the Scale Model Kits collection.