Alpha Model 1/24 Ferrari Monza SP2 Full Resin Model Kit
Couldn't load pickup availability
Alpha Model 1/24 Ferrari Monza SP2 Full Resin Model Kit
Build the Ferrari Monza SP2 in 1/24 scale with this Alpha Model full resin kit. The model captures the Monza SP2ās open two-seat cockpit, low barchetta body, flowing exterior panels, rear diffuser, wheels, cockpit controls, and finely reproduced trim details.
Key Features
- Official Alpha Model product code AM02-0048.
- Builds a 1/24 scale Ferrari Monza SP2.
- Full resin automotive model kit with finely reproduced body and cockpit details.
- Includes photo-etched metal detail parts.
- Includes water-slide decals and carbon-fiber decals.
- Features separate wheel rims, brake components, cockpit controls, rear diffuser details, and exterior trim.
- Reproduces the Monza SP2ās open two-seat barchetta configuration.
- Supplied unassembled and unpainted.
Product Specifications
| Brand | Alpha Model |
|---|---|
| Vehicle | Ferrari Monza SP2 |
| Vehicle Brand | Ferrari |
| Series | Ferrari Icona |
| Scale | 1/24 |
| Product Type | Full resin automotive model kit |
| Product Code | AM02-0048 |
| Primary Material | Resin |
| Photo-Etched Parts | Included |
| Water-Slide Decals | Included |
| Carbon-Fiber Decals | Included |
| Cockpit Detail | Included |
| Wheels and Brake Details | Included |
| Assembly Required | Yes |
| Painting Required | Yes |
| Finished Model Included | No |
Ferrari Monza SP2 in 1/24 Scale
The Ferrari Monza SP2 is a two-seat open-cockpit model from Ferrariās limited-production Icona series. Its low barchetta profile combines modern aerodynamic development with styling influenced by Ferrariās historic competition roadsters.
Alpha Model reproduces the Monza SP2 in a display-focused 1/24 format, including the open cockpit, exterior bodywork, wheel assemblies, rear diffuser, trim, and smaller control details.
Open Two-Seat Cockpit
Unlike a conventional closed coupe, the Monza SP2 leaves much of its cockpit visible on the finished model. The steering wheel, shift paddles, center console, instrument panel, seats, and interior panels therefore become important parts of the completed build.
Painting the cockpit components separately before final installation makes it easier to create clean boundaries between upholstery, carbon fiber, controls, and metallic details.
Full Resin Construction
The main body and structural components are produced in resin. This allows Alpha Model to reproduce the Monza SP2ās long flowing surfaces, low body profile, cockpit openings, and sharp aerodynamic details.
Wash and inspect all resin parts before assembly. Test-fit the body, cockpit, wheels, brake components, and exterior details before primer or adhesive is applied.
Photo-Etched Details and Decals
Photo-etched components are included for thin exterior and interior details, including small badges and trim pieces that benefit from a sharply defined metal finish.
The decal package includes carbon-fiber patterns for cockpit and aerodynamic components. Decal softener may be useful when applying markings over curved or irregular surfaces.
Bodywork and Exterior Finish
The body shell, wheel arches, front grille, headlights, rear diffuser, and exterior trim should be prepared and test-fitted before the main color is applied.
A smooth resin-compatible primer will help reveal surface imperfections before the color coat. Apply clear coat in controlled layers to avoid filling shallow panel lines or creating heavy buildup around edges.
Wheels and Brake Components
The wheel rims, brake calipers, and related components are separate parts that can be cleaned, painted, and detailed before installation.
Check the wheel position and ride height during dry assembly so the completed model sits evenly and maintains the intended stance.
Preparation and Assembly
Inspect the resin body and smaller components as soon as the kit is opened. Check the photo-etched sheet for bends and the decal sheet for damage before beginning the build.
Resin preparation, sanding, drilling, test-fitting, and minor adjustment are normal parts of assembling a mixed-media automotive kit.
Model Kit Notice: This product is an unassembled and unpainted scale model kit. It is not a finished die-cast or ready-to-display vehicle.
Build Notice: Resin preparation, careful test-fitting, sanding, drilling, and minor adjustment may be required. Use suitable respiratory and eye protection when cutting or sanding resin.
Product Notice: Paint, primer, adhesive, tools, sandpaper, decal solutions, clear coat, and a display case are not listed as included.
Recommended For
- Ferrari scale-model collectors
- Ferrari Icona series enthusiasts
- 1/24 automotive model builders
- Modelers experienced with resin kits
- Builders comfortable with photo-etched parts and decals
- Automotive airbrushing and finishing projects
- Display-model and contest-build projects
Frequently Asked Questions
What scale is the Alpha Model Ferrari Monza SP2?
Alpha Model AM02-0048 is produced in 1/24 scale.
Is this a full resin model kit?
Yes. The primary body and structural components are produced in resin.
Are photo-etched parts included?
Yes. The kit includes a photo-etched metal detail sheet.
Are decals included?
Yes. The kit includes water-slide decals and carbon-fiber decals for selected interior and exterior components.
Does the kit include cockpit details?
Yes. The build includes cockpit components such as the steering wheel, shift paddles, center console, instrument panel, and interior panels.
Are wheels and brake details included?
Yes. The official build guide identifies separate wheel rims and brake caliper components.
Is the model assembled and painted?
No. This is an unassembled and unpainted model kit.
Are paint, adhesive, and tools included?
Paint, primer, adhesive, decal solutions, and modeling tools are not listed as included.
Explore More Scale Modeling Products
Browse more premium automotive kits in the Alpha Models collection, explore additional subjects in Car Model Kits, or find more projects in the Scale Model Kits collection.