Alpha Model 1/24 Ferrari F80 Full Resin Model Kit
Couldn't load pickup availability
Alpha Model 1/24 Ferrari F80 Full Resin Model Kit
Build the Ferrari F80 in 1/24 scale with this Alpha Model full resin kit. The model captures the F80’s low cockpit, aerospace-influenced bodywork, sculpted wheel arches, active rear wing, deep rear diffuser, front aerodynamic surfaces, wheels, and distinctive modern Ferrari proportions.
Key Features
- Official Alpha Model product code AM02-0118.
- Builds a 1/24 scale Ferrari F80.
- Full resin automotive model kit.
- Reproduces the F80’s futuristic, motorsport-influenced body design.
- Features the front S-Duct, aerodynamic surfaces, rear diffuser, and active-wing profile of the full-size car.
- Captures the narrow driver-focused cockpit and wide rear body.
- Designed for experienced automotive scale-model builders.
- Supplied unassembled and unpainted.
Product Specifications
| Brand | Alpha Model |
|---|---|
| Vehicle | Ferrari F80 |
| Vehicle Brand | Ferrari |
| Scale | 1/24 |
| Product Type | Full resin automotive model kit |
| Product Code | AM02-0118 |
| Primary Material | Resin |
| Vehicle Type | Hybrid Ferrari supercar |
| Assembly Required | Yes |
| Painting Required | Yes |
| Finished Model Included | No |
Ferrari F80 in 1/24 Scale
The Ferrari F80 belongs to the company’s line of limited-production supercars, following models such as the GTO, F40, F50, Enzo, and LaFerrari.
Alpha Model recreates the F80 in a display-focused 1/24 format, preserving its low profile, wide stance, compact cabin, sculpted rear body, and sharply defined aerodynamic surfaces.
Motorsport-Derived Design
The full-size F80 draws heavily from Ferrari’s Formula 1 and World Endurance Championship experience. Its hybrid V6 architecture is closely related to the layout used by Ferrari’s 499P endurance race car.
The model’s body can be finished with clear differences between painted exterior panels, carbon-look aerodynamic areas, glazing, wheels, and smaller mechanical details.
Advanced Aerodynamic Bodywork
The F80 combines a front S-Duct, front aerodynamic elements, a flat underbody, deep rear diffuser, and adjustable rear wing to manage airflow around and beneath the full-size car.
Test-fit the front body sections, rear diffuser, wing, wheel openings, and adjoining panels before painting so their position and spacing can be checked while adjustment is still possible.
Driver-Focused “1+” Cockpit
Ferrari designed the F80 around a narrow, driver-focused cockpit. The asymmetrical layout creates the visual impression of a single-seat competition car while retaining space for a passenger.
Paint the dashboard, seat areas, controls, door panels, carbon-look surfaces, and smaller cockpit details before installing the completed interior inside the body.
Full Resin Construction
The primary components are produced in resin. This allows the sculpted body surfaces, vents, wheel arches, cockpit forms, aerodynamic channels, and smaller exterior details to retain crisp shapes.
Wash and inspect the resin parts before assembly. Test-fit the body, cockpit, wheel assemblies, glazing, diffuser, wing, and smaller exterior components before applying primer, paint, or adhesive.
Body Preparation and Painting
Check all resin surfaces for mold-release residue, casting seams, and small imperfections before primer is applied. Use a primer formulated for resin to create a stable foundation for the selected body finish.
Apply color and clear coat in controlled layers so the vents, panel lines, S-Duct, wing edges, diffuser, and other aerodynamic details remain visible.
Carbon-Look and Contrasting Surfaces
The F80’s appearance depends on the contrast between its body-colored upper surfaces and the darker technical areas around the lower body, aerodynamic components, cockpit, and rear section.
Plan these finishes before painting. Masking the carbon-look or dark technical areas as separate stages will help preserve clean boundaries across the completed model.
Wheels, Stance and Final Alignment
Dry-fit the wheel assemblies before permanent installation so the ride height, wheel position, and stance can be checked while adjustments are still possible.
Confirm that all four wheels contact the display surface evenly and that the wing, diffuser, and body panels remain correctly aligned.
Glazing and Final Assembly
Test-fit the transparent components against the body openings before finishing the exterior paint. Small fit adjustments are easier to make before the completed body has received its final clear coat.
Use an adhesive intended for clear model parts during final assembly to reduce the chance of fogging or visible surface damage.
Planning the Build
Separate the project into body, cockpit, wheels, glazing, aerodynamic components, and smaller exterior details. Completing these areas as subassemblies makes preparation, masking, painting, and alignment easier.
Review the physical instructions and all included components before starting the build.
Final Contents Notice: Confirm the physical box, instructions, decals, wheels, clear parts, and any metal detail parts before adding them as confirmed included components in Shopify.
Model Kit Notice: This product is an unassembled and unpainted scale model kit. It is not a finished die-cast or ready-to-display vehicle.
Build Notice: Resin preparation, test-fitting, sanding, drilling, trimming, and minor adjustment may be required. Use suitable respiratory and eye protection when cutting or sanding resin.
Product Notice: Paint, primer, adhesive, modeling tools, sanding supplies, decal solutions, clear coat, and a display case are not listed as included.
Recommended For
- Ferrari scale-model collectors
- Ferrari F80 enthusiasts
- Ferrari supercar collectors
- 1/24 automotive model builders
- Modelers experienced with resin kits
- Builders interested in modern aerodynamic detailing
- Automotive airbrushing and finishing projects
- Display-model and contest-build projects
Frequently Asked Questions
What scale is the Alpha Model Ferrari F80?
Alpha Model AM02-0118 is produced in 1/24 scale.
Is this a full resin model kit?
Yes. AM02-0118 is sold as a full resin automotive model kit.
Is this a finished display model?
No. This product is an unassembled and unpainted model kit.
Does the kit reproduce the F80’s aerodynamic bodywork?
The subject includes the F80’s distinctive front aerodynamic treatment, S-Duct, sculpted body, rear diffuser, and active-wing profile.
Does the model include cockpit detail?
The kit is described as a full-detail model. Confirm the exact cockpit components against the physical box and instructions.
Are decals and photo-etched parts included?
Confirm the physical kit contents before listing decals or photo-etched parts as included.
Are paint and adhesive included?
Paint, primer, adhesive, and modeling tools are not listed as included.
Is the kit suitable for a first resin model?
It is best suited to builders who are comfortable with resin cleanup, test-fitting, sanding, preparation, and mixed-media assembly.
Explore More Scale Modeling Products
Browse more premium automotive kits in the Alpha Models collection, explore additional subjects in Car Model Kits, or find more projects in the Scale Model Kits collection.