Alpha Model 1/24 Ferrari 296 GT3 Version B Full Resin Model Kit
Couldn't load pickup availability
Alpha Model 1/24 Ferrari 296 GT3 Version B Full Resin Model Kit
Build the Ferrari 296 GT3 Version B in 1/24 scale with this Alpha Model full resin kit. The model captures the race carās wide body, deep front splitter, large rear wing, extended diffuser, competition cockpit, wheels, tires, glazing, and detailed aerodynamic components.
Key Features
- Official Alpha Model product code AM02-0104.
- Builds a 1/24 scale Ferrari 296 GT3.
- Version B release with a dedicated decal configuration.
- Full resin automotive racing model kit.
- Includes photo-etched detail parts.
- Includes water-slide decals and foil markings or stickers.
- Includes resin wheel components and rubber tires.
- Includes acetate and vacuum-formed clear parts.
- Includes detailed exterior, cockpit, and structural components.
- Supplied unassembled and unpainted.
Product Specifications
| Brand | Alpha Model |
|---|---|
| Vehicle | Ferrari 296 GT3 |
| Vehicle Brand | Ferrari |
| Version | Version B |
| Scale | 1/24 |
| Product Type | Full resin automotive racing model kit |
| Product Code | AM02-0104 |
| Primary Material | Resin |
| Photo-Etched Parts | Included |
| Water-Slide Decals | Included |
| Foil Markings or Stickers | Included |
| Wheel Components | Resin |
| Tires | Rubber |
| Clear Components | Acetate and vacuum-formed parts |
| Cockpit Detail | Included |
| Assembly Required | Yes |
| Painting Required | Yes |
| Finished Model Included | No |
Ferrari 296 GT3 in 1/24 Scale
The Ferrari 296 GT3 adapts the basic proportions of the road-going 296 for international GT racing. Its bodywork is widened and reshaped around the demands of aerodynamics, cooling, track performance, safety, and rapid service during endurance events.
Alpha Model recreates the competition car in a display-focused 1/24 format with separate resin, metal, decal, wheel, tire, and clear components.
Version B Decal Configuration
AM02-0104 is identified by Alpha Model as the Version B release. It is supplied with a dedicated decal configuration intended for this particular presentation of the Ferrari 296 GT3.
Confirm the physical decal sheet before adding a team name, car number, driver lineup, championship, event, or race result to the product page. This prevents mismatches if the final production decals differ from early promotional images.
Race-Developed Aerodynamic Bodywork
The 296 GT3 is defined by its deep front splitter, widened fenders, sculpted side channels, rear diffuser, cooling openings, and large competition rear wing.
Test-fit the splitter, wing, diffuser, body panels, and smaller aerodynamic parts before applying paint so their position and spacing can be checked while adjustments are still easy to make.
Full Resin Construction
The main body, cockpit, wheel, and structural components are produced in resin. This allows the wide racing body, vents, aerodynamic surfaces, cockpit forms, and smaller details to retain sharp definition.
Wash and inspect the resin components before assembly. Dry-fit the body, cockpit, wheels, tires, glazing, splitter, diffuser, and rear wing before applying primer, paint, or adhesive.
Photo-Etched Parts and Foil Details
Photo-etched parts are included for thin details that benefit from sharply defined metal components. Foil markings or stickers are also included for selected reflective, metallic, or printed details.
Check the metal parts for bends before assembly and use an adhesive suitable for joining photo-etched metal to resin or painted surfaces.
Decals and Racing Markings
The decal sheet provides the graphic elements for the Version B racing presentation. Apply the decals over a smooth gloss surface to reduce visible carrier film and improve adhesion.
Test decal solutions on an unused section before applying them to the model, especially where markings must conform to vents, wheel arches, curved body panels, or aerodynamic surfaces.
Competition Cockpit Detail
The kit includes cockpit and interior components for reproducing the driver-focused environment of the Ferrari 296 GT3.
Paint and detail the seat, dashboard, steering controls, safety equipment, interior panels, and smaller cockpit parts before installing the completed interior assembly inside the body.
Resin Wheels and Rubber Tires
Resin wheel components and rubber tires are included. Clean and test-fit the wheels and tires before painting so the final ride height, track width, and alignment can be checked.
Confirm that all four wheels contact the display surface evenly before the wheel assemblies are permanently attached.
Clear Components and Final Assembly
The kit uses acetate and vacuum-formed clear components for glazing and transparent details. Trim and test-fit these parts carefully before painting the body.
Use a clear-part-safe adhesive to reduce the risk of fogging or damage during final assembly.
Body Preparation and Painting
Check the resin surfaces for mold-release residue, casting seams, and small imperfections before applying primer. Use a primer formulated for resin to create a stable foundation for paint.
Apply the body colors and clear coat in controlled layers so panel lines, vents, aerodynamic surfaces, and smaller racing details remain visible.
Version Notice: This is the Version B release. Confirm the physical decal sheet before adding a specific team, car number, driver, event, or race-result description.
Model Kit Notice: This product is an unassembled and unpainted scale model kit. It is not a finished die-cast or ready-to-display vehicle.
Build Notice: Resin preparation, test-fitting, sanding, drilling, trimming, and minor adjustment may be required. Use suitable respiratory and eye protection when cutting or sanding resin.
Product Notice: Paint, primer, adhesive, modeling tools, sanding supplies, decal solutions, clear coat, and a display case are not listed as included.
Recommended For
- Ferrari scale-model collectors
- Ferrari 296 GT3 enthusiasts
- GT racing and endurance-racing model builders
- 1/24 automotive model builders
- Modelers experienced with resin kits
- Builders comfortable with photo-etched parts and decals
- Race-car airbrushing and finishing projects
- Display-model and contest-build projects
Frequently Asked Questions
What scale is this Ferrari 296 GT3 kit?
Alpha Model AM02-0104 is produced in 1/24 scale.
Which version is AM02-0104?
AM02-0104 is the Ferrari 296 GT3 Version B release.
Does Version B include racing decals?
Yes. The kit includes a dedicated Version B decal configuration. Confirm the physical sheet before publishing specific team, driver, car-number, or event details.
Is this a full resin model kit?
Yes. The main body and structural components are produced in resin.
Are photo-etched parts included?
Yes. Photo-etched detail parts are included.
Are wheels and tires included?
Yes. The kit includes resin wheel components and rubber tires.
Are clear components included?
Yes. Acetate and vacuum-formed clear components are included.
Does the kit include cockpit detail?
Yes. The kit includes detailed cockpit and interior components.
Is the model assembled and painted?
No. This is an unassembled and unpainted scale model kit.
Are paint and adhesive included?
Paint, primer, adhesive, decal solutions, and modeling tools are not listed as included.
Is this suitable for a first resin model kit?
The kit is best suited to builders who are comfortable with resin preparation, careful test-fitting, photo-etched parts, decals, and mixed-media assembly.
Explore More Scale Modeling Products
Browse more premium automotive kits in the Alpha Models collection, explore additional subjects in Car Model Kits, or find more projects in the Scale Model Kits collection.