By RichPen

RichPen PTFE Packing Set 29808

$8.00 USD
$8.00 USD
Shipping calculated at checkout.
Brand: RichPen
Availability: Out of stock
SKU: 29808
RichPenRichPen Needle Cap 29723
RichPen #1 Needle Cap for Apollo 113C Airbrush - SprayGunner
RichPen #1 Needle Cap for Spectra 033G Airbrush - SprayGunner
RichPenRichPen #1 Needle Cap for Spectra 033G Airbrush
$8.00 USD
$8.00 USD
RichPen Airbrush Replacement Part

RichPen PTFE Packing Set 29808 for Spectra 033G Airbrush

Replace a worn, damaged, or missing packing component in a compatible RichPen airbrush with the RichPen PTFE Packing Set 29808. This model-specific replacement part includes one packing screw with a PTFE seal and is listed for the RichPen Spectra 033G 0.3 mm airbrush.

Key Features

  • Replacement PTFE packing set for the RichPen Spectra 033G airbrush.
  • Manufacturer SKU 29808 provides an exact reference for selecting the correct replacement component.
  • Includes one packing screw with PTFE seal for the compatible airbrush packing area.
  • Model-specific compatibility for the Spectra 033G 0.3 mm airbrush.
  • Individual replacement component allows the packing part to be replaced without purchasing a complete airbrush.
  • This listing does not include a complete airbrush, needle, nozzle, air valve, or unrelated replacement components.

Product Specifications

Brand RichPen
Product Name PTFE Packing Set
Manufacturer SKU 29808
Product Type Replacement airbrush packing component
Compatible Product Line RichPen Spectra
Compatible Model RichPen Spectra 033G
Compatible Airbrush Size 0.3 mm
Seal Type PTFE
Included Component 1 packing screw with PTFE seal
Country of Origin Japan
Complete Airbrush Included No

Compatible with the RichPen Spectra 033G

The RichPen PTFE Packing Set 29808 is listed for the RichPen Spectra 033G 0.3 mm siphon-feed airbrush. Confirm both the airbrush model and manufacturer SKU before selecting this replacement packing component.

Other RichPen airbrush models may use packing screws or seals with different dimensions and fitting requirements, even when the components appear similar.

Replacement Packing Screw with PTFE Seal

This product includes one packing screw fitted with a PTFE seal for the compatible Spectra 033G airbrush. It is listed as an individual replacement component for servicing the airbrush packing area.

Correct model identification and careful installation are important because small packing components may look similar while using different dimensions, threads, or seal arrangements.

When the Packing Set May Need Replacement

  • The original packing screw or PTFE seal is missing.
  • The packing component is visibly worn or physically damaged.
  • The component no longer seats correctly in the airbrush body.
  • The threads are damaged or no longer engage correctly.
  • The PTFE seal was damaged during disassembly or maintenance.
  • Inspection confirms that the original packing part requires replacement.

Product Notice: This listing includes one RichPen PTFE Packing Set 29808 consisting of one packing screw with PTFE seal. The complete airbrush and other replacement components are not included.

Compatibility Notice: Compatibility is listed for the RichPen Spectra 033G 0.3 mm airbrush. Do not select this packing component based only on its appearance.

Installation and Inspection Guidance

  • Confirm that the airbrush is a RichPen Spectra 033G.
  • Verify that the required replacement component uses SKU 29808.
  • Disconnect the air hose before disassembling the airbrush.
  • Remove the needle carefully before servicing the packing area.
  • Work over a clean surface so small components are not lost.
  • Inspect the surrounding threads and packing area for debris or damage.
  • Install the replacement component carefully without forcing it.
  • Test needle movement before reconnecting the air supply.

Inspect Related Airbrush Components

When replacing the packing set, inspect the needle, surrounding threads, airbrush body, and adjacent internal components for dried paint, wear, or physical damage.

A bent or damaged needle may affect movement through the packing area even after the replacement PTFE packing component is installed.

Cleaning and PTFE Seal Care

Clean the surrounding airbrush components using a cleaner compatible with the paint being removed. Avoid using sharp or abrasive tools on the PTFE seal.

Do not cut, scrape, excessively compress, or permanently deform the PTFE component during installation. Confirm smooth needle movement after reassembly.

Frequently Asked Questions

Which RichPen airbrush uses PTFE Packing Set 29808?
The RichPen PTFE Packing Set 29808 is listed for the RichPen Spectra 033G 0.3 mm siphon-feed airbrush.
What is included with RichPen Packing Set 29808?
The listing includes one packing screw with a PTFE seal.
Is this the same product as RichPen PTFE Packing Set 29807?
No. SKU 29808 and SKU 29807 are separate manufacturer references. This listing is specifically identified as SKU 29808 for the Spectra 033G airbrush.
Does this listing include a complete RichPen airbrush?
No. This listing includes one replacement packing component only. The complete airbrush and other replacement parts are not included.
Can this packing set be used with another RichPen model?
Compatibility is confirmed for the Spectra 033G. Do not use this part with another model unless its official parts information also lists manufacturer SKU 29808.
Does the packing set include an airbrush needle?
No. The airbrush needle is a separate component and is not included with the PTFE packing set.
Should the PTFE seal be cut or modified?
No. Do not cut, scrape, stretch, or permanently deform the PTFE seal during installation.
Should the airbrush be tested after installation?
Yes. Confirm smooth needle movement and normal airbrush operation before loading and spraying paint.

View the Compatible RichPen Airbrush

Review the RichPen Spectra 033G 0.3 mm siphon-feed airbrush before selecting this replacement PTFE packing set.