American Icon Graphene Ceramic Coating 1140 Pro Kit

American Icon Graphene Ceramic Coating 1140 Pro Kit

The more versatile Graphene Ceramic Coating that outperform the competition. American Icon Graphene Ceramic Coating is a long lasting professional grade formula that is easy to apply. Formulated and made in the USA.

Formulated to incorporate graphene oxide, American Icon Graphene Ceramic Coating 1140 Pro creates a more durable glass-like coating on the vehicle surface to add additional UV and stain protection while improving appearance.

This advanced formula is suitable for all surfaces including all paint, glass, chrome, plastic/trim, headlights, wheels, and even wraps.

With twice the activity of standard ceramic formulations American Icon Graphene Ceramic Coating 1140 Pro can be used for gelcoats on Boats and RV applications, as well as on automotive clear coats.

FEATURES:

• 10H Hardness, 9+ Years of Protection
• Less prone to water spotting
• High stain resistance against bugs, saps, droppings, etc.
• High scratch resistance during the washing process
• Easier to apply than other Ceramic Coatings
• Increased depth and clarity to all surfaces
• Lower sliding angle with water evacuating at angles less than 10-15°
• Higher contact angles averaging 114°
• UV Tracing Technology™

Instructions

Prep Surfaces

Thoroughly clean to remove old waxes, sealers, tar, iron, and other contaminants. Embedded contaminants should be removed with a clay bar/glove and non-waxed lubricant. Remove scratches with a non-waxed/non-sealant compound and polish the surface to remove defects. Wipe all surfaces with American Icon R-S200 Surface Cleaner or an IPA prep solution for ceramic coatings.

How to apply

Shake well before and during use. Saturate the low nap microfiber towel a suede applicator or similar with numerous drops of material from the dripper bottle. Apply the coating to a 3x3 ft square area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Allow the coating to cure for 1-2 minutes and gently remove excess product using a clean low nap microfiber towel or suede cloth. Do NOT allow coating to come in contact with water for 24-48 hours while curing - if it does, remove water promptly. Apply additional coats with at least one hour between applications or immediately following a single pass around the vehicle. Do NOT apply in direct sunlight or to a hot surface. Cure time is dependent on environmental conditions - test product on a small inconspicuous area first to gauge cure time. Wait 7 days after application to wash vehicles.

Maintenance

Use American Icon Graphene Ceramic Refresh Spray to Boost and maintain the Graphene Ceramic Coating 1140 Pro after every wash and polish.