By NO-NAME brand

Master Blaster Airbrush Compressor by NO-NAME Brand

$167.00 USD
$167.00 USD
Shipping calculated at checkout.
Brand: NO-NAME brand
Availability: In stock
SKU: NN-AS186AS
Master Blaster Airbrush Compressor by NO-NAME Brand - SprayGunner
$167.00 USD
$167.00 USD
NO-NAME brandQuick Coupling Set (5mm-1/8") by NO-NAME Brand
Quick Coupling Set (5mm-1/8") by NO-NAME Brand - SprayGunner
1/8" - 1/4" Braided Air Hose (3m) by NO-NAME Brand - SprayGunner
NO-NAME brand1/8" - 1/4" Braided Air Hose (3m) by NO-NAME Brand

Air Compressors by NO-NAME Brand

Model: Master Blaster
Warranty: 1 year
Specifications:

  • Oil Free Design
  • L 14" W 5 3/4" H 14 1/4
  • Auto-Shut off at 57 psi (4 bar); Auto-Start at 43 psi (3 bar)
  • Compressor Regulator: 0-100 psi (0-7 bar) - Equipped with Filter and Gauge
  • 3L air tank to provide consistent air flow (no pulsations)
  • 6 foot power cable
  • 1/6 HP
  • 110 Volt
  • Air Flow: 20-23 L / Minute
  • Noise Level: 47 dB / 1m
  • User Manual
  • Metal Case around Compressor and Tank
  • 2 airbrush holders for gravity feed airbrushes
  • 1/8" connection
  • On/Off Switch
  • Suction Cups on bottom for added stability

This compressor is suitable for commercial spraying, cosmetics, nail studios and Tattoo designs, illustrations, hobbies modelling, fishing lures and much more. The AS-186A is a great compressor at the price including a 3L air tank to help deliver consistent airflow and stop the pulsations that tankless compressors often deliver. The AS-186A also comes with a metal protective case keeping the compressor and tank safe.

Every NO-NAME Brand Compressor is INSPECTED and TESTED in our warehouse in Tampa, FL before going out to the customer!

Customer Reviews

Based on 19 reviews
79%
(15)
21%
(4)
0%
(0)
0%
(0)
0%
(0)
100.0
A
Aaron combs
Highly pleased with this compressor

I have used many conpressors over the years. Most were outside units for pneumonic tools and automotive spray guns. For indoor units i have tried from iwata, grex, and no name , this is by far the highest quality unit for studio use. It is the quietest of the 3 indoor units ive used. I have had no drops in pressure when using iwata or grex airbrushes and have been able to lay smooth even coats on every piece ive tried so far. I have even been able to use my grex fan spray tip with no need of pressure adjustment ( normally needed to increase pressure 15 to 25 lbs ). All in all i highly recommended this product and will be purchasing this brand again if i ever need to replace.

G
Guest
Loving it

So far I don have a single complaint. Its even quieter than I thought it would be. I had my whole order less than 48 hours from ordering and the package was wonderfully packed by Omar. Thanks!

Q
Quint Conlin
Master Blaster !

Money well spent ! Thanks Wendy for the nice pack job . This is a solid built compressor fast recovery time and super quiet . The metal case has a nice finish to it as well . Customer service is awesome a well .

E
Eugene DuBey
Master Blaster

This unit works very well, more than adequate for my needs, painting scale models. It runs quietly enough. My one gripe is the pressure gauge is inconveniently positioned and a bit hard to see unless you're looking down at it. The pressure adjust knob locks very positively. This is the 2nd compressor I've owned. I would like to caution users to drain the air tank from the bottom frequently, as water/ invisible gunk in my old compressor ruined the tank and I believe affected paint. Bear in mind that I never saw any water in the trap or AB hose. I believe the tank corroded in the first month or so, so be diligent, and pro-active.

A
Adam

This thing is awesome ! It has the power to run smaller touch up guns and anything else I throw at it. It literally took them 3 days to get it to me spraygunner is the best. I have ordered plenty from them and never been disappointed I just wish I would have found d them sooner !

Load More