Alpha Model 1/20 Ferrari SF-24 2024 Formula One Full Resin Model Kit
Couldn't load pickup availability
Alpha Model 1/20 Ferrari SF-24 2024 Formula One Full Resin Model Kit
Build the Ferrari SF-24 in 1/20 scale with this Alpha Model full resin kit. The model recreates Ferrari’s 2024 Formula One car with its sculpted sidepods, tightly packaged rear bodywork, detailed floor, front and rear wings, open cockpit, halo, suspension, wheels, and complex aerodynamic surfaces.
Key Features
- Official Alpha Model product code AM03-0014.
- Builds a 1/20 scale Ferrari SF-24.
- Represents Scuderia Ferrari’s 2024 Formula One car.
- Full resin Formula One model kit.
- Includes photo-etched detail parts.
- Includes decals, wheels, and clear parts.
- Reproduces the SF-24’s front wing, rear wing, sidepods, floor, suspension, cockpit, halo, and open-wheel layout.
- Suitable for detailed racing-livery, carbon-look, and aerodynamic finishing work.
- Supplied unassembled and unpainted.
Product Specifications
| Brand | Alpha Model |
|---|---|
| Vehicle | Ferrari SF-24 |
| Team | Scuderia Ferrari |
| Season | 2024 Formula One World Championship |
| Drivers | Charles Leclerc and Carlos Sainz |
| Scale | 1/20 |
| Product Type | Full resin Formula One model kit |
| Product Code | AM03-0014 |
| Primary Material | Resin |
| Photo-Etched Parts | Included |
| Decals | Included |
| Wheels | Included |
| Clear Parts | Included |
| Exact Decal Configuration | Verify the physical decal sheet |
| Assembly Required | Yes |
| Painting Required | Yes |
| Finished Model Included | No |
Ferrari SF-24 in 1/20 Scale
The SF-24 was Scuderia Ferrari’s Formula One car for the 2024 season. Driven by Charles Leclerc and Carlos Sainz, it was the 70th Ferrari chassis created to compete in the Formula One World Championship.
Alpha Model recreates the car in 1/20 scale, giving the cockpit, suspension, wings, wheels, floor, and aerodynamic bodywork greater visual presence than a smaller automotive scale.
Modern Ground-Effect Aerodynamics
The SF-24 belongs to the current generation of ground-effect Formula One cars. Its body is shaped around a detailed floor, sculpted sidepods, front and rear wings, suspension elements, cooling openings, and tightly packaged rear bodywork.
Test-fit the floor, sidepods, engine cover, wing elements, and smaller aerodynamic parts before applying primer or paint.
Full Resin Construction
The main components are produced in resin, allowing the body surfaces, floor edges, wing elements, cockpit forms, and smaller aerodynamic details to retain sharp definition.
Wash and inspect all resin parts before assembly. Dry-fit the body, floor, cockpit, suspension, wheels, front wing, rear wing, and smaller components before applying primer, paint, or adhesive.
Photo-Etched Detail Parts
Photo-etched parts are included for thin or sharply defined components that are difficult to reproduce at the same scale in thicker resin.
Check the metal sheet for bends before starting the build. Use adhesive suitable for joining photo-etched metal to resin or painted surfaces.
Open Cockpit and Halo
The open cockpit is a central feature of the completed SF-24 model. The seat, steering controls, cockpit surround, halo, headrest area, and smaller interior details should be finished before the cockpit is installed in the main body.
Building the cockpit as a separate subassembly makes masking, detail painting, and final placement easier.
Front and Rear Wing Assembly
Modern Formula One wings use multiple thin elements with carefully controlled spacing. Clean and dry-fit each part before permanent assembly.
Use a flat reference surface when aligning the front and rear wing components so the completed assemblies remain level and symmetrical.
Suspension, Wheels and Ride Height
Dry-fit the suspension and wheel assemblies before final installation. The wheel position, camber, track width, and ride height have a major effect on the finished appearance of an open-wheel racing model.
Confirm that all four wheels contact the display surface evenly before the suspension components are permanently attached.
Ferrari Racing Livery
The SF-24 uses Ferrari red with black, yellow, white, and sponsor markings across the body, wings, cockpit, halo, and aerodynamic surfaces.
Confirm the physical decal sheet before identifying a specific driver, car number, Grand Prix, or special-event configuration on the product page.
Decals and Printed Markings
Decals are included for the intended SF-24 presentation. Apply them over a smooth gloss surface to reduce visible carrier film and improve adhesion.
Test decal-setting solutions before applying them over wing elements, sidepods, engine-cover sections, vents, or tightly curved body panels.
Carbon-Look and Technical Finishes
The floor, suspension, wings, cockpit, lower body sections, and other technical components can be finished with dark carbon-look surfaces and subtle differences in sheen.
Plan these areas before applying the main body colors. Staged painting and careful masking will help preserve clean boundaries between the Ferrari livery and exposed technical surfaces.
Body Preparation and Painting
Check all resin surfaces for mold-release residue, casting seams, and small imperfections before primer is applied. Use a primer formulated for resin to create a stable foundation for the paint finish.
Apply the body colors and clear coat in controlled layers so vents, panel lines, wing edges, suspension details, and aerodynamic surfaces remain clearly defined.
Planning the Build
Divide the project into body, floor, cockpit, suspension, wheels, front wing, rear wing, and smaller aerodynamic subassemblies.
Review the physical instructions, decals, clear components, metal parts, and resin pieces before starting. This will help determine the correct sequence for preparation, paint, decals, and final assembly.
Scale Notice: This kit is listed as 1/20 scale by the product title, supplier sheet, and specialist retailers. Alpha Model’s product-page description contains copied 1/24 wording that should not be used for this SKU.
Decal Notice: Available references conflict regarding the exact race configuration included with AM03-0014. Confirm the physical decal sheet before adding Bahrain, Australia, Italy, Las Vegas, driver numbers 16 or 55, or another Grand Prix version.
Model Kit Notice: This product is an unassembled and unpainted scale model kit. It is not a finished die-cast or ready-to-display Formula One model.
Build Notice: Resin preparation, test-fitting, sanding, drilling, trimming, and minor adjustment may be required. Use suitable respiratory and eye protection when cutting or sanding resin.
Product Notice: Paint, primer, adhesive, modeling tools, sanding supplies, decal solutions, clear coat, and a display case are not listed as included.
Recommended For
- Scuderia Ferrari collectors
- Ferrari SF-24 enthusiasts
- Charles Leclerc and Carlos Sainz fans
- Formula One model builders
- 2024 Formula One collectors
- 1/20 racing model builders
- Modelers experienced with resin kits
- Builders comfortable with detailed wing and suspension alignment
- Formula One airbrushing and livery projects
- Display-model and contest-build projects
Frequently Asked Questions
What scale is the Alpha Model Ferrari SF-24?
Alpha Model AM03-0014 is a 1/20-scale Formula One model kit.
Why does Alpha Model’s description mention 1/24 scale?
The official page title, supplier list, and specialist retailers identify AM03-0014 as 1/20 scale. The 1/24 wording in the body of Alpha Model’s page appears to be copied text and should not be used for this listing.
Which Formula One season does the kit represent?
The kit represents Scuderia Ferrari’s SF-24 from the 2024 Formula One season.
Who drove the Ferrari SF-24?
Charles Leclerc and Carlos Sainz drove the SF-24 during the 2024 Formula One season.
Is this a full resin model kit?
Yes. AM03-0014 is sold as a full resin Formula One model kit.
Are photo-etched parts included?
Yes. Photo-etched detail parts are included.
Are decals, wheels, and clear parts included?
Yes. Specialist listings for AM03-0014 identify decals, wheels, and clear parts as included.
Which driver or Grand Prix decals are included?
Confirm the physical decal sheet before publishing a specific driver, car number, or Grand Prix configuration because current supplier references are not consistent.
Is the finished model included?
No. This is an unassembled and unpainted scale model kit.
Are paint and adhesive included?
Paint, primer, adhesive, decal solutions, and modeling tools are not listed as included.
Is this kit suitable for beginners?
The kit is best suited to experienced builders who are comfortable with resin preparation, wing alignment, suspension assembly, decals, and mixed-media construction.
Explore More Scale Modeling Products
Browse additional premium automotive and racing kits in the Alpha Models collection, explore more vehicles in Car Model Kits, or find paints, tools, and other projects in the Scale Model Kits collection.