Jacquard Airbrush Color Fluorescent Blue 4 oz
Couldn't load pickup availability
Jacquard Airbrush Color - Fluorescent Blue (4 oz)
Make your artwork glow with the electric intensity of Jacquard Fluorescent Blue Airbrush Color. This premium, high-visibility fluid acrylic is the ultimate choice for custom sneaker artists and textile designers looking for neon effects that truly pop. Originally engineered for fabrics, its superior flexibility ensures a high-impact finish that resists cracking, peeling, and chippingâeven on high-flex surfaces like leather and rubber.
Whether you are detailing neon leather kicks, vinyl accessories, or high-viz models, Jacquard Fluorescent Blue offers exceptional coverage and a bold, "day-glow" hue that remains soft on fabric and ultra-durable on non-porous surfaces.
Why Choose Jacquard Fluorescent Blue?
- Neon Intensity: Specially formulated for maximum brightness and "electric" visual appeal under daylight or UV light.
- Unmatched Surface Grip: Bonds permanently to "hard-to-paint" surfaces including PVC, metal, ceramic, and vinyl.
- Ready-to-Spray Performance: Optimized to spray smoothly right out of the bottle with minimal tip-dry, even at lower pressures.
- Safe and Clean: Non-toxic, odorless, and water-basedâperfect for professional studio environments and indoor customization.
Technical Specifications & Application
Achieve a professional, long-lasting neon finish by following these guidelines:
| Performance Metric | Recommendation |
|---|---|
| Recommended PSI | Approximately 40 PSI |
| Minimum Nozzle Size | 0.5 mm or larger |
| Surface Prep | Clean/wash; light sanding for plastic or metal |
| Durability Method | Heat set with heat gun or dry iron (30 seconds) |
| Cleanup Solution | Water or dedicated airbrush cleaner while wet |
Application & Heat Setting Instructions
- Base Preparation: For the most vibrant neon effect, apply over a white or light-colored base coat. Clean all surfaces to remove waxes or factory conditioners.
- Light Passes: Spray in thin, light coats to prevent over-saturation. This ensures the paint remains flexible and bonds securely to the surface.
- Setting the Bond: Once dry, heat set on hard surfaces with a heat gun. For textiles, use a dry iron at the appropriate setting for 30 seconds.
- Topcoat Protection: (Optional) For maximum durability on high-wear hard surfaces, apply a layer of Jacquard Varnish after the paint has fully cured.
Expert Tips for High-Traffic Customs
- Transparency Note: Fluorescent colors are naturally semi-transparent. Applying them over a solid Opaque White base is essential for achieving the electric Blue glow shown on the bottle.
- Equipment Check: Before starting, check for bent needles or tips to avoid spattering. Ensure your 0.5 mm nozzle is clear for the best atomization of neon pigments.
- Prevent Drying: Keep bottle caps closed when not in use. If the paint sits idle in your airbrush for too long, flush with water immediately to prevent internal clogs and maintain a consistent spray pattern.