By AMMO by Mig Jimenez

AMMO by MIG Glues Black Slow Dry Cyanoacrylate

$10.73 USD
$10.73 USD
Shipping calculated at checkout.
Brand: AMMO by Mig Jimenez
Availability: In stock
SKU: AMIG8034
AMMO by MIG Glues Black Slow Dry Cyanoacrylate AMMO by Mig Jimenez
$10.73 USD
$10.73 USD
AMMO by Mig JimenezAMMO by MIG Acrylic - Lucky Varnish - Satin
AMMO by MIG Acrylic - Lucky Varnish - Satin AMMO by Mig Jimenez
AMMO by MIG Acrylic - OLIVE DRAB BASE - SprayGunner
AMMO by Mig JimenezAMMO by MIG Acrylic - OLIVE DRAB BASE

AMMO by MIG Accessories - Glues for Modelling
Item: Black Slow Dry Cyanoacrylate

From the Manufacturer:

This product can be used to glue plastic, resin, photo-etch, some metals, and similar materials. Hold the pieces together for 10-15 seconds to ensure proper bond. The black colour makes the glue highly visible, once dry the black cyanoacrylate can be sanded and carved easily.

The black colour makes the glue stand out from the surface and facilitates sanding away the excess which enables this product to be used as putty while further strengthening the joint. It is ideal for filling the seams between large parts such as an aircraft fuselage, tank hull, or any other gap in the plastic parts of your models.

Be careful to seal the container tightly to prevent hardening. Use the adhesive with the appropriate protective equipment including gloves, clothing, and eye protection while working in a well-ventilated area. Store in a cool place for the longest shelf life, ideally 16 °C (60 °F). Avoid contact with the skin and eyes.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Harris Jr.
AMMO BY MIG GLUES BLACK SLOW DRY CYANOACRYLATE

This glue is great for larger gaps and deep ejector pin marks. It's a bit too thick for small seams and doesn't make its way into them as well, but does level out well. It dries quickly for this use and is ready to sand after about 10 minutes or so depending on how thick you put it on. Pot life in a dish or paint well is closer to 30 minutes, but that also depends on amount in the well and how thin it needs to be. It will last longer, but will thicken a bit. It becomes hard and sands and blends very well once dry. It's great for those times you can't wait for putty to dry, but want a strong, smooth finish closing up gaps. It's very black with almost zero transparency.

C
Cole Jacobsen
CA glue

Works great!

D
Dennis K
Revolutionary glue/filler

It works as advertised. I was able to glue halves together AND fill the seam simultaneously. After an overnight drying period, I polished it up and there were no gaps, no seams, and a sturdy bond between the halves. A truly revolutionary product for bonding half-parts.