NO-NAME Tooty Air Compressor PS-266 Airbrush with 3m Hose and ChromaAir Primary Set

COMPRESSOR:

1 year warranty

Oil Free Design
Auto-Shut off at 57 psi (4 bar); Auto-Start at 43 psi (3 bar)
Compressor Regulator: 0-100 psi (0-7 bar) - Equipped with Filter and Gauge
3L air tank to provide consistent air flow (no pulsations)
6 foot power cable
1/6 HP
110 Volt
Air Flow: 20-23 L / Minute
Noise Level: 47 dB / 1m
User Manual
1/8" connection
On/Off Switch
Suction Cups on bottom for added stability

Airbrush:

GSI Creos Mr. Airbrush Procon Boy LWA Double Action 0.5mm
Airbrush made in Japan (used to be Gunze).

Double action gravity feed airbrush with needle travel adjustment.

Detail airbrush for modeling, illustration, and other airbrushing projects.

0.5mm nozzle
15 ml gravity cup - larger size for continuous spraying
Handle with needle adjustment for better control
Air hose included.
Standard 1/8” connector will fit Iwata, Sparmax or Master airbrush hose, any standard 1/8” quick coupling can be used with this airbrush.

1/8" - 1/8" Braided Air Hose by NO-NAME Brand
Length: 3m
Diameter: 7.5x2.5mm
Fittings: 1/8"

ChromaAir Paints - Primary Color Set

Colors: Cold White, Transparent Black, Warm Yellow, Very Red, Transparent Absolute Blue + Reducer

Volume: 2 oz. each

Universal water-based acrylic urethane airbrush paint. ChromaAir Paints offer the strength, durability, and adhesion of automotive urethanes combined with the easy spraying performance of acrylics.

Also, they are sandable! ChromaAir Paints are water-based which means no bad smell from solvents, non-explosive and are, generally speaking, safer to spray than solvent-based paints (safety first! -you should always wear a NIOSH approved respirator and spray in a well-ventilated area!).

ChromaAir Paints are suitable for many applications from general-purpose, fine art, fishing lures, scale modeling and more.

ChromaAir Paints can be mixed with almost any other water-based acrylic paint (Createx, Custom Creative, Inspire H2O, etc..) and also offer a 2-year shelf life.

Reducing:

Can be reduced with ChromaAir reducer or almost any water-based acrylic paint thinner (example: Createx 4012 high-performance reducer).

Can be reduced with distilled or deionized water.

For fine detail work, can be reduced with 70% isopropyl alcohol (DO NOT use this as a reducer for paint when spraying large areas).

The viscosity of paints varies from color to color (different pigment density) but generally, it can be sprayed directly from the bottle through 0.3mm fluid nozzles and larger.

Application: (optimal spraying conditions: 60-80 degree Fahrenheit + low humidity) Always start by cleaning your surface to be painted. Always spray a test panel before spraying your project. Allow 10-15 minutes flash time in between coats (if humid or cold allow more time). Full cure at 48 hours. Can be sanded when necessary.

Cleaning: Use the same product for reducing and cleaning (see reducing). DO NOT USE for face painting, skin/body or food products.