Iwata Ninja Jet 110-120V Airbrush Compressor
Used, was a trade-in. There is some paint on the hose and some finish blemishes on the compressor but overall it is in very good condition. Tested, inspected, cleaned, and ready to go!
The Iwata Ninja Jet compressor proves ideal for the hobbyist or professional user who needs a small, reliable source of air. The Ninja Jet's quiet operation makes it ideal for use in small work spaces and it is capable of powering most gravity feed airbrushes for low pressure applications of 1 to 15 psi.
This compressor is simple to operate and requires zero maintenance providing easy, reliable air when you need it. The air regulator knob allows you to adjust the working pressure so you can find the best spray for your airbrush and project. The built-in airbrush holder provides a safe and convenient place to rest your airbrush when you are not spraying.
Includes a durable polyurethane cobra coil airbrush hose for Iwata airbrushes. Also included are air hose adaptors for Badger, Aztek and Paasche brand airbrushes and a detailed operation manual.
Pressure Category Low
Voltage Requirement (V) 110 - 120V 60 Hz
Plug Type B
Approved Region North America
Amps (A) 1.60
Wattage (W) 95
Horsepower (hp) 1/12
Decibels (dB) 62
Air Flow @ 50 PSI (CFM) -
Air Flow @ 50 PSI (LPM) -
Air Flow @ 60 PSI (CFM) 0.35
Air Flow @ 60 PSI (LPM) 10
Max Pressure (psi) 40
Max Pressure (MPa) 0.28
Working Pressure (psi) 1 - 15
Working Pressure (MPa) 0.01 - 0.10
Auto-Shut-off No
Air Storage Tank Capacity (L) -
Air Pressure Regulator Yes
Net Weight (lbs) 2.69
Net Weight (kg) 5.93
Assembled Dimensions (in) 6.57 x 6.97 x 4.72
Assembled Dimensions (mm) 167 x 177 x 120
- Choosing a selection results in a full page refresh.