Herramientas de mantenimiento de aerógrafos profesionales Iwata
No se pudo cargar la disponibilidad de retiro
Herramientas de mantenimiento de aerógrafos profesionales Iwata
Las herramientas profesionales de mantenimiento de aerógrafos de Iwata brindan a los usuarios la mejor experiencia de mantenimiento de aerógrafos. Las herramientas de mantenimiento de aerógrafos profesionales de Iwata incluyen: Alicates de mandíbula blanda Iwata, llave guía de válvula de aire Iwata, destornilladores para empaquetaduras de agujas Iwata (1,2 mm y 1,4 mm) y llave para boquillas Iwata
Destornilladores para empaquetaduras de agujas Iwata (1,2 mm, 1,4 mm)
Retire, monte y ajuste fácilmente el juego de empaquetaduras de agujas del aerógrafo (tornillo y empaquetaduras de agujas) con los destornilladores para empaquetaduras de agujas de Iwata. El juego de empaquetadura de la aguja evita que la pintura regrese al mecanismo de palanca principal y se utiliza para ajustar la tensión de deslizamiento de la aguja.
Para retirar el juego de empaquetadura de agujas, elija el destornillador adecuado (consulte la lista). El tamaño del pasador del destornillador es del mismo diámetro que la aguja. Con el aerógrafo desmontado, inserte el destornillador en la parte posterior del cuerpo del aerógrafo hasta que se conecte con el tornillo de empaque de la aguja como se muestra. Gire lentamente el destornillador para encajar en las ranuras del tornillo del empaque de la aguja y desenrosque. El juego de empaque debe estar en el pasador del destornillador cuando se retira o puede haberse caído dentro del cuerpo del aerógrafo.
Para ensamblar, coloque el juego de empaquetaduras de agujas en el pasador del destornillador, encajando en las ranuras. Insértelo lentamente por la parte posterior del cuerpo del aerógrafo hasta que el tornillo del empaque de la aguja esté asentado y apriételo suavemente. Para ajustar la tensión de la aguja, deslice el pasador lentamente hacia adelante y hacia atrás (para sentir la tensión) mientras aprieta o afloja el tornillo.
Destornillador de empaquetadura de aguja Iwata de 1,2 mm para agujas de 1,2 mm de diámetro
Serie Micron personalizada: CM-B, CM-C, CM-SB, CM-C Plus
Serie Hi-Line: HP-AH, HP-BH
Serie Alto Rendimiento Plus: HP-A Plus, HP-B Plus, HP-SB Plus
Serie de alto rendimiento: HP-A, HP-B, HP-SB
Serie Revolución: HP-AR, HP-BR, HP-TR2
Serie Kustom — Micron CM
OCT para Iwata — CN, BCN
Destornillador de empaquetadura de aguja Iwata de 1,4 mm para agujas de 1,4 mm de diámetro
Serie Hi-Line: HP-CH, HP-TH
Serie Plus de alto rendimiento: HP-C Plus, HP-BC Plus, HP-BC1P
Serie de alto rendimiento: HP-C, HP-BC, HP-BC2
Serie Eclipse: HP-BS, HP-CS, HP-BCS, HP-SBS
Serie Revolución: HP-CR, HP-BCR, HP-SAR, HP-TR1
Serie Kustom: Eclipse CS, Hi-Line CH, Revolution TR, HP-TH
NEO para Iwata: TRN1, TRN2
Alicates de mandíbula blanda Iwata
Utilice estos alicates especializados para montar o desmontar su aerógrafo. Las inserciones de nailon de la mandíbula se agarran firmemente sin dañar la superficie cromada. Hay insertos de repuesto disponibles.
Llave guía de válvula de aire Iwata
Seleccione el extremo de diámetro pequeño o grande de la llave guía de válvula de aire Iwata para su modelo de aerógrafo específico (consulte la lista). Para reemplazar la válvula de aire, coloque la llave en las dos ranuras de la guía de la válvula de aire y desenrosque. Retire y reemplace la válvula de aire y vuelva a ensamblarla. Para personalizar la tensión del resorte de la palanca principal, simplemente afloje o apriete la guía de la válvula de aire.
Diámetro pequeño para
Serie Micron personalizada: CM-B, CM-C, CM-SB, CM-C Plus
Serie Hi-Line: HP-AH, HP-BH, HP-CH, HP-TH
Serie Plus de alto rendimiento: HP-A Plus, HP-B Plus, HP-C Plus, HP-BC Plus, HP-SB Plus, HP-BC1P
Serie de alto rendimiento: HP-A, HP-B, HP-C, HP-BC, HP-BC2, HP-SB
Serie Revolución: HP-TR1, HP-TR2
Serie Kustom: Hi-Line CH, Micron CM,
Revolución TR, HP-TH
Gran diámetro para
Serie Eclipse: HP-BS, HP-CS, HP-BCS, HP-SBS
Serie personalizada: Eclipse CS
Serie Revolution: HP-AR, HP-BR, HP-CR, HP-BCR, HP-SAR
No es compatible con NEO para aerógrafos de la serie Iwata.
Llave para boquillas Iwata
La llave para boquillas autocentrante de Iwata se utiliza para quitar o apretar la boquilla en el cuerpo del aerógrafo sin riesgo de apretarla demasiado. No es compatible con los aerógrafos de la serie Iwata Eclipse ni con el aerógrafo de gatillo de alimentación lateral NEO para Iwata TRN2.
Iwata Professional Airbrush Maintenance Tools
Iwata Professional Airbrush Maintenance Tools provide the ultimate airbrush maintenance experience to users. Included in the Iwata Professional Airbrush Maintenance Tools are; Iwata Soft Jaw Pliers, Iwata Air Valve Guide Wrench, Iwata Needle Packing Screw Drivers (1.2mm and 1.4mm) and the Iwata Nozzle Wrench
Iwata Needle Packing Screw Drivers (1.2 mm, 1.4 mm)
Easily remove, assemble and adjust the airbrush needle packing set (needle packing screw and packing) with the Iwata Needle Packing Screw Drivers. The needle packing set prevents paint from back-flowing into the main lever mechanism and is used to adjust the sliding tension of the needle.
To remove the needle packing set, choose the appropriate screw driver (see list). The screw driver pin size is the same diameter as the needle. With the airbrush disassembled, insert the screw driver into the back of the airbrush body until it connects with the needle packing screw as shown. Slowly turn the screw driver to engage the slots in the needle packing screw and unscrew. The packing set should be on the screw driver pin when removed or it may have fallen into the airbrush body.
To assemble, place the needle packing set onto the pin of the screw driver, engaging the slots. Slowly insert through the back of the airbrush body until the needle packing screw is seated and gently tighten. To adjust the needle tension, slide the pin slowly back and forth (to feel the tension) while tightening or loosening the screw.
Iwata Soft Jaw Pliers
Use these specialized pliers to assemble or disassemble your airbrush. The nylon jaw inserts grip firmly without damaging the chrome surface. Replacement inserts are available.
Iwata Air Valve Guide Wrench
Select the small or large diameter end of the Iwata Air Valve Guide Wrench for your specific airbrush model (see list). For air valve replacement, fit the wrench into the two slots of the air valve guide and unscrew. Remove and replace the air valve and reassemble. To customize the main lever spring tension, simply loosen or tighten the air valve guide.
Iwata Nozzle Wrench
The self-centering Iwata Nozzle Wrench is used to remove or tighten the nozzle onto the airbrush body without the risk of over-tightening. Does not fit the Iwata Eclipse Series airbrushes and the NEO for Iwata TRN2 side-feed trigger airbrush.
SprayGunner Achieves Platinum Crown Dealer Status with Iwata - A New Milestone in Excellence
At SprayGunner, we are thrilled to announce that we have been awarded the prestigious Platinum Crown Dealer status by Iwata. This esteemed recognition is a testament to our commitment to providing our customers with the highest quality airbrushes, compressors, accessories, and parts from Iwata. As a Platinum Crown Dealer, we proudly carry the entire range of authentic Iwata products and offer fast shipping across the nation.
What is the Iwata Crown Dealer Program?
Understanding the Crown Dealer Tiers: Iwata’s Crown Dealer program is designed to recognize and reward dealers who demonstrate a commitment to excellence in offering Iwata products. Dealers are awarded crowns based on the percentage of total Iwata items they carry. The tiers are:
- Bronze Crown Dealer: Represents dealers who carry a select range of Iwata products.
- Silver Crown Dealer: Recognizes dealers with a broader selection of Iwata items.
- Gold Crown Dealer: Awarded to dealers who carry a substantial range of Iwata products.
- Platinum Crown Dealer: The highest tier, reserved for dealers who carry the complete range of authentic Iwata products and excel in service and support.
This is what SprayGunner can offer our awesome customers:
Comprehensive Product Range: As a Platinum Crown Dealer, SprayGunner offers the full spectrum of Iwata products. From top-of-the-line airbrushes and compressors to essential accessories and parts, our inventory includes everything you need for your airbrushing projects. Whether you’re a professional artist or a hobbyist, you can trust that we have the right tools to meet your needs.
Authentic Iwata Products: Our Platinum status assures customers that all Iwata products available at SprayGunner are 100% authentic. We are committed to providing only genuine products that meet Iwata’s high standards of quality and performance.
Expert Knowledge and Support: Our team at SprayGunner is well-versed in Iwata products and airbrushing techniques. As a Platinum Crown Dealer, we are equipped to offer expert advice and support to help you select the right products and achieve the best results in your projects.
Fast Nationwide Shipping: One of the benefits of our Platinum status is our ability to offer fast shipping across the nation. We understand that timely delivery is crucial, and we are dedicated to ensuring that your Iwata products arrive quickly and safely, no matter where you are in the country.
Explore Our Range of Iwata Products
At SprayGunner, we are proud to offer the full range of Iwata airbrushes, compressors, accessories, and parts. Our Platinum Crown Dealer status is a mark of our dedication to quality and customer service, ensuring that you receive the best products and support in the industry.
Discover the full range of Iwata products at SprayGunner and enjoy the confidence that comes with purchasing from a Platinum Crown Dealer. Shop now at SprayGunner for the best selection, competitive prices, and expert advice.
We are excited to continue serving the airbrushing community with the highest standards of quality, expertise, and support. Thank you for choosing SprayGunner, and we look forward to helping you achieve your creative goals with the finest Iwata products.
SprayGunner Return Policy for Iwata Airbrushes
30-Day Hassle-Free Returns:
SprayGunner offers a 30-day hassle-free return policy for all Iwata airbrushes. Customers can return the product for any reason within this period for a full refund or exchange, with no questions asked. Just send us a message to sales@spraygunner.com
Extended Returns for Store Credit:
For returns initiated within 60 days after delivery, customers can choose to receive their refund as a store credit, offering additional flexibility.
Return Shipping:
- For customers in the lower 48 states: SprayGunner provides free return shipping, making the process easy and cost-effective.
- For customers outside the lower 48 states, including overseas: Customers are responsible for obtaining a return shipping label. These can be purchased through local carriers or directly from SprayGunner.
This policy ensures that purchasing an Iwata airbrush from SprayGunner is a risk-free and customer-friendly experience.
- Al seleccionar una opción, se actualiza toda la página.
Tu carrito
Tu carrito esta vacío
¿Tienes una cuenta?
Inicia sesión para finalizar tus compras con mayor rapidez.