Juego de aerógrafo con alimentación por gravedad y gatillo de pistola con manguera de NO-NAME Brand
No se pudo cargar la disponibilidad de retiro
Juego de aerógrafo con alimentación por gravedad y gatillo de pistola con manguera de NO-NAME Brand
Este juego de aerógrafo profesional multiuso viene con 3 juegos de boquillas, 3 tamaños de copa y una manguera de aire de 6 pies. ¡Es extremadamente versátil y puedes rociar con cualquiera de las 3 tazas intercambiables o ninguna! Los distintos tamaños de punta le permiten lograr un rociado con detalles finos, un rociado general y patrones de rociado amplios o puede usarlo con materiales de rociado extra gruesos. Se entrega en estuche de plástico.
- Utilice las configuraciones de punta de 0,3 o 0,5 mm para aplicaciones en las que se requiere un control preciso de la pulverización para realizar trabajos muy detallados, como: gráficos de automóviles y motocicletas, bellas artes, decoración de uñas, ilustraciones, etc.
- Utilice la configuración de 0,8 mm cuando desee un patrón de pulverización más amplio o cuando pulverice materiales más gruesos.
Características:
- El diseño del gatillo de la pistola rociadora le brinda la sensación de una pistola rociadora y al mismo tiempo le brinda el control preciso de la pulverización de un aerógrafo.
- Cuenta con boquillas autocentrantes para una alineación perfecta y un control uniforme en todo el rango de pulverización y proporciona un flujo de pintura muy alto.
- Pulveriza materiales de pintura de viscosidad ligera a pesada con un patrón de pulverización variable.
- La microválvula de control de aire en el cabezal del aerógrafo permite un control preciso de la pulverización microfina.
- 3 tamaños de vasos de líquido por gravedad con rosca: 1/16, 1/6 y 1/2 oz.
- Perilla de control de fluido que proporciona un fácil ajuste del gatillo y control del flujo de pintura.
Especificaciones:
- Tipo: alimentación por gravedad con gatillo fijo de doble acción (control de aire y fluido); Mezcla interna para un patrón de pulverización completamente atomizado.
- Tamaños de punta: juegos de agujas y boquillas de 0,3, 0,5 y 0,8 mm
- 3 vasos de gravedad atornillables: 1/16 oz (2 cc), 1/6 oz. (5 cc) y 1/2 oz. (14 cc)
- Patrón de pulverización: Desde la línea del cabello hasta 2" de ancho; Presión de trabajo: 15-50 PSI
- Incluye: manguera de aire trenzada de 6' con accesorios de 1/8", llave para boquillas, guía de instrucciones y estuche de plástico moldeado
El empaque de agujas de PTFE resistente a solventes prolonga la vida útil de los aerógrafos. Permite el uso de pinturas automotrices de base solvente: uretanos, lacas y esmaltes.
¡Los juegos de agujas/boquillas de repuesto están disponibles en Spraygunner.com!
Medios comunes:
- Acuarelas y acrílicos
- Tintas, tintes y colorantes alimentarios
- Uretanos automotrices
- Lacas y Esmaltes
Hecho en china
***** No incluye soporte para aerógrafo.
Customer Reviews
I had an other inexpensive trigger type airbrush that recently bit the dust, so I bought this one to take it's place for doing the work of spraying micro fil primers, and dissolved putty products. It does that very well. The one problem I had, was when it arrived, I tried to disassemble it so I could give it a good thorough. Upon cleaning. Upon trying to remove the nozzle from the cap that holds it in place, I found that the cap had been tightened to the point that I had to resort to a small crescent wrench to loosen it. Once the cap was off, the nozzle was jammed into so tight that I could not remove it. I actually had to resort to a small piece of wood and a small mallet to get it out. The fact that I had to resort to this method meant the nozzle was damaged and became useless. Fortunately, I had a spare nozzle of the same type and size to replace it.
I have several airbrushes. The prices range from $30 to $ 120. I definitely like the trigger type airbrushes best. Of all the airbrushes I've purchased, I think this is the best airbrush for the money. I only paint 1/24th scale car models, I use the .8 needle and nozzle on this brush. I have not tried the smaller needle and nozzle, I have no need for fine work. I do have a $100 airbrush, that sprays a nicer pattern, but the end paint job looks very near the same on both brushes. I use all Createx Wicked colors paint. The $100 airbrush is manufactured, using better material, and has a nicer finish, but if your doing models, this brush will get the job done.
My 9 year old grandson wanted to learn to airbrush lures. I told him he could not use my airbrushes so I bought this brush for him.
My thoughts were that he could bypass the technique of learning to start his strokes with air and stopping his strokes with air. It worked perfectly for that. He practiced on a clipboard with card stock paper attached. It didn’t take him very long to get comfortable with it.
He comes to my house after school and so far, in less than a week he has painted two crank baits. Both of them are the same color. Other than talking him through the painting process the only thing I helped him with was holding the stencil that he used to make the shad dot. After I take him home I put eyes on them and clear coat them with Lure Coat epoxy. Which I have found to be very user friendly. After seeing the first one the next afternoon after it was epoxyed. He was elated and said, “Pop, it looks like store bought”. I said,”Yep, you really did a good job, can’t wait to see what you will be able to do in a couple of years.”
I really like this air brush and so does my grand son. It feels very comfortable in my hand and was easy to learn and easy to use and control. For the money spent, I feel that it was an excellent deal and well worth buying. I would highly recommend it to anyone who wants to learn to airbrush.
Great products and prices, and always and accurate shipping 👍👍
- Al seleccionar una opción, se actualiza toda la página.
Tu carrito
Tu carrito esta vacío
¿Tienes una cuenta?
Inicia sesión para finalizar tus compras con mayor rapidez.