Specialist Paints Metal Flake Color: Holographic Gold (L)

(No reviews yet) Write a Review
SKU:
LMFHOLO-02/50G
Gift wrapping:
Options available
Shipping:
Calculated at Checkout
  • Specialist Paints Metal Flake Color: Holographic Gold (L)
  • Specialist Paints Metal Flake Color: Holographic Gold (L)
$9.99

Description

Specialist Paints Metal Flake

Color: Holographic Gold (L)

Volume: Approx. 2 oz

Holographic Metal Flakes are one of the finest flakes available. They shimmer through a rainbow of colours when viewed at different angles. Specialist Paints Holographic Metal Flakes are solvent proof and wont fade in sunlight as they have a high UV coating on them. Apply Specialist Paints Holographic Metal Flakes over any base color to produce a real custom effect. The Metal Flake can be added to solvent or water based lacquers, clear base coats, varnish and can also be used for Arts n Crafts.

Apply Specialist Paints Holographic Metal Flakes over any base color to produce a real custom effect, but most customers use a black basecoat. Specialist Paints recommends adding the Holographic Metal Flake to their intercoat clear base coat, but you can add them to an automotive solvent or water based lacquer, clear base coats and varnish. Depending on how heavy you want the Holographic Metal Flake effect, will depend on how much you will need.

  • Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  • Apply 2-3 coats of Base coat.
  • Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
  • Apply the Holographic Metal Flake until you get the effect you desire. Always spray test panels before spraying your product or project to see the effect you desire.
  • Apply lacquer until the Holographic Metal Flake is fully covered and you have full Gloss.

The Holographic Metal Flakes are available in Medium (008 Hex) and Large (015 Hex).

(SMF) Small Flake is the fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is the medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.5 nozzle set-up or larger.

(LMF) Large Flake is the large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.8 nozzle set-up or larger.

View AllClose

0 Reviews

View AllClose