KBS NuMetal - Black (3.5 oz)
- Gift wrapping:
- Options available
- Calculated at Checkout
Volume: 3.5 oz
KBS NuMetal Epoxy Putty is an easy-to-use two part putty that you simply mix and mold like clay. No weighing or measuring required.
- Before mixing NuMetal, clean off any loose debris, grease, oil, gasoline, rust, or dirt from surface.
- KBS Klean is the ideal surface prep.
- For best results sand or rough up the surface to help improve the putty's adhesion.
- NuMetal that is cold or below 70 degrees Fahrenheit will be stiffer and slightly more difficult to mix and also take longer to set.
- NuMetal that is warm or above 90 degrees Fahrenheit will be softer and easier to mix, but will have a shorter work life and set much quicker.
- Allow approximately 30+ minutes for work time.
- NuMetal will begin to set in about 1 hour from the time mixing is complete and will be fully cured in about 12 hours.
- Using a 1:1 ratio, cut only what you need.
- Cut equal parts of A and B bars using a ruler as a guide.
- It is much easier to mix several smaller quantities together than a large amount.
- Knead and roll the NuMetal in your hands or on a clean working surface.
- Work at least 2 minutes for a walnut-sized piece; work at least 15 minutes for a whole pound.
- Firmly press, shape or mold the NuMetal to the surface that you are repairing.
- For a very smooth, professional looking surface and to eliminate the need for sanding, smooth and feather with wet fingertips before drying.
- Expect a steel hard cure in about 12 hours.
- After Curing, NuMetal can be sanded, drilled, routed, screwed, chiseled, surfaced, tapped, turned, filed, carved, stained, or painted.
- Securely seal any unused putty in the plastic zip bag.
- Clean all tools, reusable gloves, or any other used objects with soap and warm water IMMEDIATELY.
- Wash hands thoroughly with soap and water, especially before eating, drinking, or smoking.
- NuMetal has a very good shelf life.
- Always place any unused putty in the securely sealed plastic zip bag and store in a cool dry location.