ChromaAir Paints: Halloween Set 1
- Gift wrapping:
- Options available
- Calculated at Checkout
ChromaAir Paints - Halloween Set 1
Colors: Transparent Black, Cold White, Fluorescent Green, Fluorescent Yellow, Fluorescent Blue, Fluorescent Orange, Fluorescent Purple
Volume: 2 oz. each
Universal water-based acrylic urethane airbrush paint. ChromaAir Paints offer the strength, durability, and adhesion of automotive urethanes combined with the easy spraying performance of acrylics.
Also, they are sand-able! ChromaAir Paints are water-based which means no bad smell from solvents, non-explosive and are, generally speaking, safer to spray than solvent-based paints (safety first! -you should always wear a NIOSH approved respirator and spray in a well-ventilated area!).
ChromaAir Paints are suitable for many applications from general-purpose, fine art, fishing lures, scale modeling and more.
ChromaAir Paints can be mixed with almost any other water-based acrylic paint (Createx, Custom Creative, Inspire H2O, etc..) and also offer a 2-year shelf life.
Can be reduced with ChromaAir reducer or almost any water-based acrylic paint thinner (example: Createx 4012 high-performance reducer).
Can be reduced with distilled or deionized water.
For fine detail work, can be reduced with 70% isopropyl alcohol (DO NOT use this as a reducer for paint when spraying large areas).
The viscosity of paints varies from color to color (different pigment density) but generally, it can be sprayed directly from the bottle through 0.3mm fluid nozzles and larger.
Application: (optimal spraying conditions: 60-80 degree Fahrenheit + low humidity) Always start by cleaning your surface to be painted. Always spray a test panel before spraying your project. Allow 10-15 minutes flash time in between coats (if humid or cold allow more time). Full cure at 48 hours. Can be sanded when necessary.
Cleaning: Use the same product for reducing and cleaning (see reducing). DO NOT USE for face painting, skin/body or food products.
*** ChromaAir Fluorescent Colors are NOT lightfast. Similar to all neon colors, both water & solvent-based, ChromaAir Fluorescent Colors fluoresce (emit light) because the pigment is in a state of decay and will eventually fade. ***
Spraygunner went above and beyond for me. They were out of the cold white that comes with the set so they shipped me warm white with the set and also shipped the cold white when in stock a few days later! Thank you Spraygunner! These paints worked well. As mentioned, some need thinning, some don't. I airbrush 1/64 scale model race cars (electric slot car bodies) made from either resin or plastic. Some colors dry matte, some satin, but once clear coated with gloss, man do they pop! As a test, I sprayed direct to styrene with zero prep other than a wipe with alcohol and had no tape pull up after 45 minutes of dry time. To be sure when painting on styrene, I would seal or primer first anyway. All in all it's easy to use and thanks to Spraygunner, very reasonably priced. Thank you!