ChromaAir FX Paint: Cherglowbyl

(No reviews yet) Write a Review
  • ChromaAir FX Paint Cherglowbyl CA106 ChromaAir Paints
  • ChromaAir FX Paint: Cherglowbyl  CA106 ChromaAir Paints
  • ChromaAir FX Paint Cherglowbyl CA106 ChromaAir Paints
  • ChromaAir FX Paint Cherglowbyl CA106 ChromaAir Paints
$6.00 - $27.00
Frequently bought together:


FX Cherglowbyl Paint Water-Based Acrylic-Urethane Airbrush Ready Color by Chroma Air

 Color: Cherglowbyl UV reactive color. Check out the video for this product to see how it gloves in UV light. 

Volume: 2oz. or 16oz.

New ChromaAir FX Line! These colors were created specifically with prop creators, modelers,  and gamers in mind to achieve the most realistic look for their projects. 

Universal water-based acrylic urethane airbrush paint. ChromaAir Paints offer the strength, durability, and adhesion of automotive urethanes combined with the easy spraying performance of acrylics.

Also, they are sandable! ChromaAir Paints are water-based which means no bad smell from solvents, non-explosive and are, generally speaking, safer to spray than solvent-based paints (safety first! -you should always wear a NIOSH approved respirator and spray in a well-ventilated area!).

ChromaAir Paints are suitable for many applications from general-purpose, fine art, fishing lures, scale modeling and more.

ChromaAir Paints can be mixed with almost any other water-based acrylic paint (Createx, Custom Creative, Inspire H2O, etc..) and also offer a 2-year shelf life.


Can be reduced with ChromaAir reducer or almost any water-based acrylic paint thinner (example: Createx 4011 Reducer).

Can be reduced with distilled or deionized water.

For fine detail work, can be reduced with 70% isopropyl alcohol (DO NOT use this as a reducer for paint when spraying large areas).

The viscosity of paints varies from color to color (different pigment density) but generally, it can be sprayed directly from the bottle through 0.3mm fluid nozzles and larger.

Application: (optimal spraying conditions: 60-80 degree Fahrenheit + low humidity) Always start by cleaning your surface to be painted. Always spray a test panel before spraying your project. Allow 10-15 minutes flash time in between coats (if humid or cold allow more time). Full cure at 48 hours. Can be sanded when necessary.

Cleaning: Use the same product for reducing and cleaning (see reducing). DO NOT USE for face painting, skin/body or food products.

Made in the USA

View AllClose

0 Reviews

View AllClose